This article will give you a talk about Erizer wireless charging will not be charged for a while, and Erizer 5 wireless charging corresponding knowledge points, I hope to help you, do not forget to collect the site oh. < / p > < h2 > the article directory list: < / h2 > < ul > < li style = 'margin - bottom: 3 px; list-style: none'>1, Wireless charging is automatically disconnected in a few seconds
Please use with the Qi certified charger to exclude whether there is a problem with the wireless charger; If your iPhone has a thick case, metal case, or battery case, try removing the case or case; If you have notifications turned on, your iPhone will vibrate a lot and may displace, causing it to stop charging. If this happens, consider turning off the vibrate feature: or temporarily turn on Do not Disturb mode to prevent your iPhone from moving.
Compatibility problems, power shortage, faulty equipment and other reasons. Compatibility problems: Wireless charging devices of different mobile phones and vehicles have compatibility problems, resulting in unstable charging connections. Low battery: The vehicle's wireless charging device is not enough to charge the phone continuously. Faulty device: The vehicle's wireless charging device or mobile phone can also malfunction, causing the charging connection to be interrupted.
mate60 wireless charging intermittent may be caused by the following reasons: the quality of the charger or charging base is poor, it is recommended to replace a high-quality charger or charging base. The distance between the charging base and the mobile phone is too farTherefore, the wireless charging signal is unstable, and it is recommended to keep the phone at an appropriate distance from the charging base.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
The reasons for this are as follows: First, the magnetic phone case will be wireless to the phoneThe charging coil produces interference, which affects the charging effect. The wireless charging coil of the mobile phone needs to be accurately aligned with the coil of the charger to achieve charging, and the magnetic phone case will change the shape and weight of the mobile phone, making the wireless charging coil and the coil of the charger cannot be accurately aligned, resulting in poor charging effect.
There may be several reasons: The distance between the charger and the phone is too far. Wireless charging usually requires keeping the phone within three centimeters of the charger. If the distance is too far, the charge will be interrupted. The charging device or wireless charging base is damaged. Wireless charging devices if installed or used improperly? '> What if wireless charging doesn't work?
Try to replace another wireless charging base to charge the phone and determine whether the fault is the fault of the mobile phone or the wireless charger. The non-Huawei wireless charger may be incompatible with the mobile phone, resulting in abnormal wireless charging function. It is recommended to use Huawei official wireless charger. If the preceding problems persist, you are advised to back up the phone data (third-party applications such as QQ and wechat need to be backed up separately), bring related accessories and purchase vouchers, and go to a nearby Huawei customer service center for testing.
Different brands of models due to the difference in coil position, may lead to low charging efficiencyOr can not charge, please put the mobile phone wireless charging area in the wireless charger induction area to try. Please do not use too thick or magnetic insulation material/metal material case, these cases may affect the charging efficiency or can not be charged, or even overheating to cause the phone can not be charged or damaged.
Check the charger and power adapter: Make sure the wireless charger and power adapter you are using is compatible with the Mate 30. Sometimes, incompatible chargers may not work properly. It is recommended that you use original or certified chargers and adapters. Clean and check the device: Check your Mate 30 and noneWhether there is any dust, dirt or foreign matter on the cable charger. These substances may interfere with the normal operation of the wireless charging function.
If the mobile phone cannot use wireless reverse charging, please follow the following steps: Please check whether the wireless reverse charging switch is turned on. Set the battery and turn on the wireless reverse charging switch. Please confirm whether the battery of your charging phone is more than 20%. If the battery of the phone is less than 20%, please use the charger to charge the phone first, and then wireless reverse charging after the battery is higher than 20%.
The reasons are as follows: Click the notification barClick the button to turn on wireless backcharging. The charged device needs to be placed in the correct position in the center of the rear cover. The device to be charged needs to support the standard Qi wireless charging protocol (for example, AppleWatch is a non-Qi wireless charging device, which cannot be charged through the wireless backcharging function). There should be no metal ornaments or foreign objects between the phone and the device being charged.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. Using a protective phone case that is too thick may hinder wireless chargingElectricity, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally.
If you confirm that the model is OK, but there is still no wireless charging, you can refer to the following methods to try to solve it. Restart the iPhone If the iPhone wireless charging suddenly does not charge, it may be because sometimes the iOS system update has unpredictable errors, resulting in noIf there is a problem with the line charging function, it can usually be solved by restarting the machine.
Because millet's wireless charging treasure may charge the number of frames and charging frequency and your Apple eight p mobile phone charging frequency is not in the same frequency band. So in a few seconds it will automatically shut down and you can rematch your phone and then charge it.
There is a problem with wireless charging, use the original wireless charging. Wireless charging power interface loose, poor contact, reconnect the excuse can be.
1, the charger is not compatible: wireless charging needs to be used with a compatible wireless charger. Make sure the wireless charger you use is compatible with your phone and is Qi compliant. Charger power problem: Make sure that the wireless charger is connected to a normal power supply and that the power supply voltage is stable. Obstacles between the phone and the charger: Make sure there are no metal or magnetic objects between the wireless charger and your phone.
2, check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Make sure the wireless charger indicator isNo It lights up normally. At the same time, check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. You are advised to reinsert it. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
3, because some mobile phone protective cover is too thick, or the material of the mobile phone protective cover may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective cover and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
4, different brands of models due to the difference in coil position, may lead to low charging efficiency or can not be charged, please put the mobile phone wireless charging area correctly in the wireless charger induction area to try. Please do not use too thick or magnetic insulation material/metal material case, these cases may affect the charging efficiency or can not be charged, or even overheating to cause the phone can not be charged or damaged.
5, if your mobile phone using wireless charging board can not charge normally, may be due to a variety of reasons, it is recommended that you tryThe following operations: Please check whether the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge.
The introduction of Arezer wireless charging will not be charged for a while and Arezer 5 wireless charging is over. Do you know if you can find the information you need? If you want to know more about this, remember to follow this site. < / p >