This article gives you a talk about BSI wireless charging temperature, and BSI 15w wireless charging corresponding knowledge points, I hope to be helpful to you, don't forget to collect the site oh. < / p > < h2 > the article directory list: < / h2 > < ul > < li style = 'margin - bottom: 3 px; list-style: none'>1, Beisi 1 generation ripple heat
Internal fault: There is a fault in the charger internal circuit, such as thermistor damage or circuit board short circuit, etc., turn off the charger, stop using for a period of time, and let the charger cool naturally. Excessive current: the voltage or current used by the charger exceeds its rated range, causing the charger to overheat. Check the operating instructions of the charger to confirm whether the voltage and current used by the charger are within the rated range.
Times is a heat dissipation function, 3C certification, faster than the ordinary charger, has been plugged in is also a little heat, not like PuIt's hot through the charger.
This is because when high-power charging, the transformer will generate a certain amount of heat, and there will be a certain amount of energy loss, which will be emitted in the form of heat, causing the charger to heat up. However, under normal circumstances, the temperature of Baseus 67W charger will not exceed the safe range, and will not cause harm to the device and the human body.
When charging two laptops, due to the large current, a certain amount of heat may be generated, but this will not affect the normal use of the charger. At the same time, this charger has intelligent temperature controlTechnology, can automatically adjust the temperature to ensure the safety and stability of the charger. Therefore, you can use it with confidence. However, it is recommended to maintain good ventilation during use to avoid overheating of the charger. Thank you for your question.
Feel comfortable, durable. The product also uses an LED digital display, which can visually display the amount of electricity and is easy to use. In the process of using BSI charging bank, users have reflected that the product has the following advantages: First, the charging speed is fast, and it only takes 1-2 hours to fill a mobile phone; Secondly, sufficient power, can be filled with multiple devices; Finally, there is no noise and no heat during useIt is very quiet and comfortable to use.
Safety and Thermal management Ripple tests show that AiF X Bix Gallium nitride 65W is the leader in thermal management with the smallest 50mV ripple, while Xiaomi and Purple rice have larger ripple. However, the high power dissipation brought by the gallium nitride design makes the heat risk of Aiphox A port, which must be paid attention to when using. In the safety evaluation, there are protocol problems in millet 65W, there is a risk of electric shock in Aifibex gallium nitride, and purple rice is stable.
Do not worry about the temperature problem, Beisi wireless charging products have product temperature protection function, after a long time of charging, the temperature will always be maintained at the right temperature.
Do you want to ask Bex jelly wireless charger does not charge also heat how to do? Internal failure, excessive current. Internal failure: There is a fault in the charger's internal circuit, such as heatThe source adapter will not heat up after charging. In addition, it can be placed vertically to reduce the contact area with the desktop, so as to better exchange heat with the air; Or put a common desktop CPU heat sink on top of the power adapter to help dissipate heat; You can also add a USB fan to cool it.
Depending on what type of notebook, the requirements are different, but if it is off, even if the charging efficiency is low, it can be charged, so that it can support two notebooks. If it is a low-power portable, the use state can also support two.
As long as it isGallium nitride chargers without ground wires will leak, of course, not particularly serious leakage, but the hand will feel electric shock.
Beisi multi-function desktop fast charger, if it is for a Lenovo notebook produced after 2019, it can be charged, if it is previously produced Lenovo computer needs a special interface, I hope to help you.
BatteryAging: The charging treasure is used for a long time, and the battery aging results in reduced capacity and cannot be fully charged. (2) Outlet failure: The power bank outlet is damaged or poorly connected, resulting in unstable output current. (3) Input port failure: The charging bank input port is damaged or poorly connected, resulting in unstable charging current. (4) Charging power supply failure: The charging power supply failure of the charging treasure may cause the charging current to be unstable or unable to charge.
pro According to your description, it is recommended that you try the following operations: shutdown charging test; Replace the charging position to eliminate intermittent charging problems caused by poor socket contact; If stripParts allow replacement of the original charger for testing.
If the power bank is fully charged but cannot charge the phone, it may be caused by the following reasons: Data cable damage: If the data cable of the power bank is damaged or the connection is not strong, it may not be able to charge the phone. You can try to replace a new data cable or make sure that the data cable is connected properly. Damaged cell phone battery: If the cell phone battery is damaged or the battery is too low, the charging bank may not be able to charge the phone.
Use the original data cable and charger for charging. Replace the data cable and charger for charging.
BSI charging treasureThere are several possible reasons why you might stop after a while. The output voltage of the charging bank is insufficient. This is determined according to the principle of charging, it must be high voltage flow to low voltage, the mobile phone is generally 7V, the mobile power supply lithium battery is 7V, so it is flat, so the mobile power supply will be boosted to 5V when the output voltage, so that high voltage flow to low voltage, charging.
1. The power supply is faulty. The charger's battery is low or the machine is malfunctioning,The charger can be connected to the power supply and recharged. Poor contact. If the charging device is in poor contact with the charging base or the interface is dirty, use a soft cloth to clean the metal contact points on the charger and charging device. The power supply does not match. If the charger and the power supply do not match, it will lead to insufficient power and cannot be charged normally.
2, the reason for the battery heat: the power consumption of the mobile phone in standby is very small, that is, the equivalent load resistance of the battery is large, so the discharge current is very small, so the battery will not heat, the internal consumption of battery power is very small. Cell phones consume a lot of power while waiting to talk or using MP3 players,That is to say, the equivalent load resistance of its battery is small, and it is a large current discharge when working.
3, do not work and heat, should be more short circuit, if it is local heat, it is likely to be a local short circuit of the external circuit, it is recommended to open the inspection. Exclude the local short circuit of the external circuit and heat, then your charging treasure can be thrown away, and the internal short circuit charging treasure becomes an indefinite time bomb. Mobile phone charging treasure, also known as mobile phone power supply, mobile power supply.
4, because the main structure of the wireless charger is a coil, the main structure of the device that your mobile phone receives wireless charging is also a coil, and the coil overcurrentHeat is very normal, the general temperature rise is not too high no problem.
Under normal circumstances, in the process of charging the mobile phone with a high-power charger, the battery has some slight hot, these are very normal phenomena, do not worry too much. Using high power consumption applications (such as playing games, watching videos, live streaming, etc.) while charging will cause more heat, it is recommended that you use the phone after charging.
The two charging ports of the power bank can charge different devices at the same time without damage. Dual USB chargers are generally 1A and 1A output current. Suitable for fast and slow charging. There are also USB ports for charging iphones and Android phones.
This is normal, but if it is too hot, the charging port is changed to a new one, because it has been in poor contact.
This is the end of the introduction of Beisi wireless charging temperature and Beisi 15w wireless charging, do not know you find the information you need? If you want to know more about thisRemember to collect attention to this site. < / p >