Today to share the knowledge of touch pen wireless charging, which will also explain how the touch pen can not be charged, if you happen to solve the problem you are now facing, don't forget to pay attention to this site, start now!
< ul>1, the touch screen pen is usually charged by USB interface. In detail, how the stylus is charged depends on its model and design. Most touch pens come with a USB charging cable, which is the most common way to charge. Users only need to connect the charging port of the stylus to a USB cable, and then plug the other end of the USB cable into a computer, mobile power supply or any charging device with a USB interface.
2, the way the stylus is charged usually depends on its model and design. Most touchscreen pens adoptTo charge with the USB interface, the user only needs to connect the charging interface of the touch screen pen to the USB cable, and then plug the other end of the USB cable into a computer, mobile power supply or other charging device with a USB interface. During the charging process, the indicator light of some touchscreen pens will light up or blink, indicating that it is charging.
3, the specific method: put the flat side of the pen body in the middle of the right side of the plate, and then move the pen body left and right, and put the pen body in the position of the maximum magnetic suction. When the pen body is properly fitted to the middle frame on the right side of the tablet, the tablet will pop up a reminder of wireless charging of the pen and display the current battery of the pen.
4, the first step, the cotton swab to become the contact surface of the phone with water. Second, fold a piece of plastic wrap in half, and then fold it again. Third, wrap the center of the four-layer plastic wrap around the end of the cotton swab dipped in water. Step 4: Tear off a long strip of plastic wrap and begin to wrap it around the Q-tip. The important thing is to make sure that the four sides of plastic wrap are tightened around the Q-tip. Step 5: Flatten the end that has been soaked in plastic wrap.
5, slightly pull out the upper part of the pen vertically. Use a 5V power adapter and Micro USB cable to charge the pen. Note: When charging, MaThe tePen indicator lights up and displays the battery status: low charge red, medium charge orange, 90% + green. After charging is complete, align the laser pointer button with the pointer body button and vertically install the upper part of the pointer.
Wireless charger not all mobile phones can be used, so change the mobile phone will not be charged, then we will understand the wireless charging situation. Mobile phones that support wireless charging are: Apple, Huawei, Xiaomi, SamsungNokia, Microsoft, MOTOROLA.
Apple 11 Change the third-party battery wireless charge can not be used for the following reasons: The mobile phone protection case is too thick, choose a thin mobile phone protection case when using wireless charging or do not use. The phone is not aligned with the charging area of the wireless charger. Check the wireless charging area as determined by the wireless charger specification. Wireless charger and mobile phone wireless charging system is not suitable, use the mobile phone wireless charging requirements of the charger.
Apple 11 wireless charging can not be used Apple 11 wireless charging can not be used may be the mobile phone protection shell is too thick, it is recommended to choose a thin model when using wireless chargingMobile phone case or not used. The phone case is too thick will affect the induction of the charging coil and the wireless charger in the phone, resulting in normal charging.
When there are inclusions between the mobile phone and the wireless charging board, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally. Connect your phone directly to the wired charger to see if it can be charged.
Apple 15 wireless charging can not be chargedThe reasons may be as follows: The device is not aligned with the charger. If the device is not properly placed in the center of the charger, or there is a physical barrier, it may cause charging failure. The charger is not connected to power. Make sure the wireless charger is plugged into the power adapter and connected to the power supply. The power adapter is faulty. If the power adapter fails, it may affect the work of the wireless charger.
1, supported. Query the usage parameters of the product from Huawei MallHuawei touchscreen notebook supports the use of a stylus, which allows you to write and draw by touching the screen. However, it should be noted that the use of the stylus requires a certain hardware configuration and driver support. If a Huawei touchscreen notebook supports the stylus function, it usually comes with a dedicated stylus, or you can purchase the corresponding stylus separately.
2. Huawei Touch notebook has a way to use touch pen. After going to the Settings of the device, you can find a setting called "Touchpad" at the bottom, and then click "Touchpad".
3. Huawei matebook14 touch screen version and non-touch screen version, touch screen version supports handwriting function, direct hand operation or stylus operation can be very convenient, especially for multi-screen collaboration can be operated by hand is very convenient. Click: simulates the left mouse click. Click twice: simulates a double left mouse click. Two fingers click at the same time: simulates right mouse click. Three fingers click at the same time: Open windows Search.
Capacitor pen: Capacitor pen can be usedInstead of a touchscreen pen, because both are based on the working principle of capacitors. Capacitive pens are generally more accurate than fingers because the tip of the capacitive pen is smaller and provides better control. Make your own touchscreen pen: If you don't have a capacitive pen, try making one. A simple method is to remove the refill of the ballpoint pen and leave only the pen holder for use.
The stylus can be replaced with the following: Finger Most touch screen devices support direct finger touch operations. Fingers are the most direct and no extra cost alternative. In addition to the touchscreen pen, there are some dedicated stylus on the market that can be touchedUse on touch screen. These stylus are often adapted to specific devices and can provide a more precise touch experience than a finger.
In this case, you can use batteries, chopsticks, homemade touchscreen pens, etc. Battery: The negative electrode of the battery can be used as a conductor to contact the screen, achieving basic click and slide operation, and do not let corrosive battery liquid leak onto the screen. Chopsticks: Especially metal chopsticks or wooden chopsticks with a smooth surface that will not scratch the screen, the tip part of which can be used for touch operation.
The stylus can be replaced with a finger, an ordinary pen or pencil, a cotton swab, or a capacitive pen. simplestThe substitute is the finger. We can directly touch the screen with our fingers, although it is not as accurate as the touch screen pen, but it can basically meet the needs of daily use. If you have a regular pen or pencil, you can also replace the stylus.
What can replace the stylus at home You can use batteries instead of the stylus at home. Capacitive touch screen technology mainly uses the current induction of the human body to work, so it needs conductive materials to complete, the negative battery can be conductive, can be used to replace the touch screen pen, if there are other conductive items at home can also be used to replace.