During the charging process, please place the center of the mobile phone slightly lower in the center of the wireless charger base to avoid shifting the mobile phone. If the position deviation is large, it will not be able to charge. 6, please check whether the wired charging device is connected at the same time. If wired charging and wireless charging are used at the same time, wired charging will be preferred.
If your mobile phone cannot use wireless charging, please follow the following steps: Check whether the mobile phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check the connection between the charging base, data cable, charger, and power supplyWhether the connection is in poor contact, you are advised to reinsert it.
Replace the wireless charger: When our mobile phone appears in such a situation, it is likely that we have a problem with the charger, at this time we can replace a wireless charger to try (original wireless charger or usb data cable) restore factory Settings: if the fault is still on after the boot, at this time we can restore the mobile phone factory Settings to try.
The location of the charged device will affect the charging efficiency, and the farther the location is from the center, the lower the charging efficiency, even beyond the effective charging range of wireless charging. Please confirm whether the receiving device is supported> Please take off the mobile phone protective case before charging because some mobile phone protective case is too thick, or the material of the mobile phone protective case may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective case and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
Please use the original protective shell, do not use too thick or magnetic insulation material/metal material protective shell, these protective shells may affect the charging efficiency or can not be charged, and even overheating cause handsThe machine cannot be charged or damaged. If the above methods do not solve the problem, please back up the mobile phone data in advance, and bring the mobile phone, wireless charger, wired charger set and purchase voucher to vivo customer service center for testing.
Charger problem: Please make sure that the wireless charger you are using is working properly and meets the wireless charging standard of OPPO A92s. It is recommended to use OPPO's original wireless charger or a certified charger. Charging base position: Wireless charging requires placing the phone on the charging base, ensuring that the position between the charging base and the phone is correct. Maybe your handThe machine is not in good contact with the charging base, resulting in failure to charge.
If your mobile phone cannot use wireless charging, please follow the following steps: Check whether the mobile phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger.
During the charging process, please slightly lower the center of the phonePlace in the center of the wireless charger base, please avoid the mobile phone shift, the position deviation will cause a large failure to charge. 6, please check whether the wired charging device is connected at the same time. If wired charging and wireless charging are used at the same time, wired charging will be preferred.
If your mobile phone cannot use wireless charging, please follow the following steps: Check whether the mobile phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger.
Different brands of models due to the difference in coil position, may lead to low charging efficiency or can not be charged, please put the mobile phone wireless charging area correctly in the wireless charger induction area to try. Please do not use too thick or magnetic insulation material/metal material case, these cases may affect the charging efficiency or can not be charged, or even overheating to cause the phone can not be charged or damaged.
Please use other receiving devices that support wireless charging (such as Mate20 pro, iPhoneX, iPhone8/P30 Pro) to try wireless reverse charging. If it can be recharged, it could beThere is a problem with the receiving device. Please check whether the mobile version is the latest version: Click Settings, enter software Update in the search box, and click Check for Updates.
Replace the wireless charger: When our mobile phone appears in such a situation, it is likely that we have a problem with the charger, at this time we can replace a wireless charger to try (original wireless charger or usb data cable) restore factory Settings: if the fault is still on after the boot, at this time we can restore the mobile phone factory Settings to try.
Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
Hello! Different models of charger specifications are possibleIt is different, like the current output of the charger is not the same. The standard charging current of the charger can ensure better charging efficiency, such as the small charging current of the charger will extend the charging time or charge no electricity, if it exceeds the maximum, it may break down the electronic components.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally.
The methods that can be taken in this case are: make sure that the phone is compatible with the wireless charger, check the charger and the power adapter, and check the alignment between the wireless charger and the phone. Make sure your phone is compatible with your wireless charger: Make sure your phone supports wireless charging and that the wireless charger is compatible with your phone model. Different phone models may have different charging standards, so you must use a wireless charger that supports your phone model.
The causes are as follows: In the notification bar, click the button to enable wireless reverse charging.The charged device needs to be placed in the correct position in the center of the rear cover. The device to be charged needs to support the standard Qi wireless charging protocol (for example, AppleWatch is a non-Qi wireless charging device, which cannot be charged through the wireless backcharging function). There should be no metal ornaments or foreign objects between the phone and the device being charged.
1, the reason why the car charging light is not bright is that the charging light filament is open;A blown fuse makes the pilot circuit impassable; Or indicator regulator power line conductor open or connector loose; Loose cable ends on poles; Ignition switch failure; Generator brush and collector ring contact is bad. If the fuse is intact, carry the load under no-load conditions.
2. The wireless charging panel is damaged. The wireless charging power supply insurance is damaged. The wireless function of the phone is damaged. The wireless charging line is damaged. First replace the phone, then check the insurance, check the panel, and finally deal with the line, wireless charging is very convenient to use.
3, the reason for this situation is as follows: chargingThe device is not plugged in: if the charger plug is not plugged in, or the power socket is not powered on, it will lead to the failure to charge normally, and it will also lead to the failure of the charging light. Wireless charger failure: If the wireless charger fails, it will lead to charging cannot be carried out, and it will also lead to the situation that the charging light is not bright. At this time, you need to replace the charger or contact after-sales service for repair.
4, the wireless charger bright red light is not on there are two possibilities, one is the charging light is broken, the other is the charger line is broken or broken.
5, maybe the wireless charging is broken. Please check the instructions for the wireless charging baseIf the indicator light is not on, please check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended that you re-plug it. In general, a Qi wireless charger has a flat surface, known as a charging pad, on which mobile devices can be placed to charge.
6, the car charger indicator light is not bright reason: charging indicator light filament break; The fuse is burnt so that the indicator line is blocked; The lead of the indicator or regulator power line is broken or the connector is loose; The cable end on the battery pole is loose. Ignition switch failure; The generator brush is in poor contact with the collector ring.
This is the end of the introduction about how Trumpchi gs5 wireless charging can't be charged and Trumpchi gs4 wireless charging does not respond. Do you know if you can find the information you need? If you want to know more about this, remember to follow this site. < / p >