Today to share the knowledge of how to install the computer desk wireless charger, which will also explain how the desktop wireless charger can not be charged, if you happen to solve the problem you are now facing, don't forget to pay attention to the site, start now!
< ul>First, use a screwdriver to disassemble the wiring screws reserved for the shell of the socket, and check whether there is a fixed wiring base inside. If there is a wiring base, connect it in the following ways: Connect the wiring coordinate L (the insert bar is generally connected with a red jacket cable) to the live wire. The wiring coordinate N (the strip is generally connected with a blue sheath cable) is connected to the neutral line. The wiring coordinates of E (usually yellow-green leather cable connection in the strip) do not need to be connected.
If you need to connect, unscrew the cover plate behind the wireless socket, strip the insulation layer of the three ends of the wire, and useThe wire end is connected to the copper connector inside the socket, tightened with the driver, and then the cover plate can be used.
At present, the commonly used plug on the market is generally a four-row socket. If the socket is connected, all the terminals marked with the letter "L" in the four sockets should be connected in parallel, and then connected with the live wire, and then connected with the terminals marked with the letter "N" in parallel, and then connected with the neutral wire, and then connected with the terminals marked with the ground symbol. When connecting, tighten the terminal and ensure that the wire core is not exposed.
The upper part of the bull wireless socket seat body is connected to the plug headThe back of the plug head is provided with a power plug, and the power plug is electrically connected to the power jack through a line inside the socket body. Compared with the prior art, it has the characteristics of reasonable design, simple structure, convenient installation, does not affect the use of other wall interfaces, and strong firmness.
Bull row insert yellow, blue and brown three-color wiring: ordinary socket with 1 switch has 4 wires, connection method: zero wire (light blue or black wire on the wall) connect to the N terminal on the socket; The PGND cable (yellow and green two-color cable on the wall) is connected to the PE terminal on the socket; The firewire (other color wire on the wall) is connected to the L terminal on the socket; Red is usually fireLine, display L flag; Blue is generally the zero line, showing the N sign; The yellow is usually grounded and indicates the PE mark.
The front jack facing the socket should be left zero right fire, the wiring hole in the socket should be marked, the live line is L, the zero line is N; When crimping the core, the core should not be exposed, and the multi-core wire should be crimped after tin lining; Third, the crimping is firm to prevent the use of high-power electrical appliances, causing heat to burn the socket. It is recommended that the core wire length of the junction box be about 8 to 10CM.
1, the specific installation steps of the dresser: the cutting part of the connecting plate is stuck into the back panel of the makeup table, so that the lower end holes are aligned with the corresponding holes on the back of the dresser, and then the flat head screws are placed into the connecting plate holes, and the flat head screws are tightened clockwise with a "ten" shaped screwdriver, and the counterclockwise direction is split. Install the other connecting plate in the same way as above.
2, the cutting part of a connecting plate is stuck into the back panel of the dresser, so that the lower end holes are aligned with the corresponding holes on the back of the dresser, and then the flat head screws are inserted into the connecting plateIn the hole, use a ten-shaped screwdriver to tighten the flat-head screws clockwise and counterclockwise.
3, first need a wireless charger and a data cable. Then insert the data cable into this hole, and then connect the other end of the charging cable to the charger head. Then plug the charging head connected to the data cable into the socket, take out the wireless charger device, connect it to the phone and cover the phone case. Finally, put the phone on the wireless charger disk to start wireless charging.
4, using the latest wireless charging technology, by using the magnetic field generated between the coils, magical transmission of electricityThe charging cable interface can not only charge the mobile phone wirelessly, but also hide the usb interface, and the user can directly charge the mobile phone on the cabinet at any time.
This panel is a coil combination, so that the phone can be conveniently placed anywhere on the panel can be charged, without alignment. Its internal structure is roughly as follows: the shortcomings are not without, because the multi-coil wireless charging board product has as many as a dozen or even several wireless charging coils built in, and the problem in heating cannot be underestimated.
The smart nightstand allows you to get rid of all the charging cables on the previous nightstand. Smart bedside tables are built inWireless charging module, when the device that supports wireless charging is placed in the designated area, it can directly start charging, which is very convenient. In addition, it also integrates two USB ports to charge traditional devices for daily use. You can charge your electronic devices directly. In fact, this is the wireless charger and the bedside table as one of the design, the table has a charging area, sleep at night when you want to charge the phone, directly put it here on the line, do not need a socket and do not need a charging line, clean and refreshing, simply not too convenient.
lateWhen sleeping, on the bedside table, you can charge it as soon as you put it, and you can use it without unplugging, which is quite convenient. When you wake up in the morning, your phone is fully charged and full of happiness.
Pen holder and bookshelf, it is best to choose the same color system as the tablecloth laid on the desk, such as the white pen holder plus gray cotton linen, such a combination appears relatively clean and cold. Of course, for the arrangement of small desks, it is still recommended to choose more practical items, such as desk lamps or reading shelves, makeup mirrors and makeup cases.
Cloth tissue bag The paper towel bag on the desk, I recommend cloth. It can basically wrap the whole paper towel, and it can also be decorated on the deskEffect. You can also buy some paper towel packs with text and patterns, which look very healing.
The steps for primary school students to organize their desks are as follows: Prepare tools: cleaning cloth, garbage bags and necessary stationery. Empty your desk: Remove everything from your desk and put it aside or on the floor. Remove debris: Wipe the surface of the desk with a cleaning cloth to remove dust and stains. Categorize items: Categorize items by category, such as school supplies, toys, stationery, etc.
2, first of all, you need to have an iPhone that supports wireless charging, such as the iPhoneX, iPhone8, iPhone8Plus and so on. Then you need to buy wireless chargers from formal channels and recommend them to Apple's official resellers. Before connecting the power supply, power on the wireless charger and ensure that there are no magnetic objects around it. Then put it in a flat place to prevent the phone from slipping off.
3, first of all, make sure that the Apple phone supports wireless charging function. Then buy Apple wireless charger in the formal channel. Then power on the wireless charger, make sure there are no magnetic objects around before connecting the power. Then place it on a flat surface to prevent it from slipping. Finally, place the iPhone on the wireless charger.
4, power on the wireless charger, please make sure that there is no magnetic object around before connecting the power. Then place it in a flat place to prevent the phone from slipping off it. Finally, put the iPhone on the unlimited charger, and pay attention to the wireless charging induction area of the iPhone, which is generally the middle of the phone. After that, you will see the phone screen light up, the phone will make a ding sound, and the color of the battery icon will turn green, indicating that the charging is successful.
5, you need to buy a wireless charger, plug the wired end in the socket, and plug the end in the wireless charger. It's used like a charger, oneThe head needs to be connected to the power supply, and the end needs to be plugged into the wireless charger. Place the phone on the wireless charger and you can see that it is already charging. Turn the screen up. For the best charging effect, choose the position as the center.
6, now Apple has not officially launched wireless charging, it is expected that the iPhone8 will be equipped with wireless charging, but now there are some accessories can be wireless charging, the wireless charging receiver is inserted into the iPhone charging interface the wireless charging receiver is inserted into the iPhone charging interface; Then install a mobile phone case, let the mobile phone case press the wireless charging receptionA surname; Then put on the QI standard wireless charging mobile power supply can be wireless charging.
About the computer desk wireless charging how to install and desktop wireless charger how to charge the end of the introduction, do not know you find the information you need? If you want to know more about this, remember to follow this site. < / p >