How to use the electric vehicle air pump, let the editor take you to understand it: How to use the electric vehicle air pump with the inflation line folded on the side to pull him out and clip him in the electric vehicle valve mouth. Then is the preparation of the power plug, it should be noted here that if the positive and negative do not match, it can not be used. Turn the switch on the front of the fuselage and look at the barometric indicator. Generally electricCar 5 pressure is appropriate.
Prepare the inflation tool: manual air pump or electric air pump, make sure that the air pump connection port matches the electric vehicle valve. Find the valve of an electric vehicle: usually located on the hub next to the wheel, near the side of the tire. Open the air pump: Depending on the type of air pump being used, open the switch or gate of the air pump. Connect the air pump and valve: Connect the connecting port of the air pump with the valve of the electric vehicle to ensure that the connection is tight and avoid air leakage.
The inflation cable folds on the side, then pulls it out and clips it to the electric vehicle valve mouth. Prepare the power plug, pay attention to the positive and negative electrode matching.For a long time and strong inflation work, the pump needs to consume more electricity, which will also lead to frequent flushing.
3, good. According to the relevant information, the newly bought wireless electric pump needs to be charged after purchase to use, if it can not work properly after getting it, it may be because of insufficient power. Therefore, before using the wireless electric pump for the first time, you need to use the charger to charge it until it is fully charged. Charging time is generally within 2-3 hours, the specific time can refer to the product manual.
4, they include: battery power inBefore you buy a wireless car pump, you need to make sure it has good power storage capacity, which means its built-in battery life must be very long. Some wireless in-car pumps have built-in rechargeable batteries that can inflate several car tires on a single charge, ensuring your tire pump lasts longer. Tire size There are various types of wireless automotive inflators on the market today.
5, along the way in the top 10 car pump brand ranking, along the road was established in 2011, is China's famous automobile supplies manufacturers, the company headquarters set up in Nanjing, Jiangsu Province. The brand is committed to using the most cutting-edge technologyTo create quality products for customers, now has more than 100 national patent technology.
6, the instructions for the use of wireless air pump are as follows: Before operating the air pump, first check and start the car engine, and then remove the power connector of the air pump, connect the car cigarette lighter, here pay attention to clearly know the power pressure of the air pump in advance, if the voltage is too large, use the battery clip.
1, the use of vehicle air pump: power: vehicle air pump can be throughPower can be obtained through the 12V cigarette lighter port and the battery. Connect the air nozzle: unscrew the tire air nozzle cap and connect the air pump's inflation tube to it. Set the charge pressure: After the charge pump is successfully powered and connected to the air nozzle, the charge pressure can be set on the setup panel.
2, it is necessary to start the vehicle, plug the connector on the air pump into the cigarette lighter of the vehicle, power the air pump, and turn on the switch, screw off the air nozzle on the tire, insert the output top of the air pump in the tire air mouth, start to inflate the tire, observe the pressure on the air pump, pull out after reaching the normal value. vehicleThere are two places that will show the normal value of the tire pressure of the vehicle, the first place is on the inside of the vehicle fuel tank cap.
3, if the car tire pressure is too low or too high, it will affect the normal use of the car, so once the tire pressure is found to be insufficient, it is necessary to inflate the tire as soon as possible, but they do not know how to operate, the following to introduce how to use the car tire pump. First, turn on the power switch, at this time the LED prompt light will be bright, and the vehicle's air pump will be in the standby state.
The use of the vehicle air pump: power: the vehicle air pump can be powered by two ways, that is, through the 12V cigarette lighter interface and through the battery. Connect the air nozzle: unscrew the tire air nozzle cap and connect the air pump's inflation tube to it. Set the charge pressure: After the charge pump is successfully powered and connected to the air nozzle, the charge pressure can be set on the setup panel.
Need to start the vehicle, plug the connector on the air pump into the cigarette lighter of the vehicle, power the air pump, and turn on the switch, screw off the air nozzle on the tire, insert the output top of the air pump into the tire air mouth, openStart to inflate the tire, observe the pressure on the pump, and pull out after reaching the normal value. There are two places where the tire pressure value of the vehicle will show the normal value of the tire pressure of the vehicle, the first place is on the inside of the vehicle fuel tank cap.
Connect the car air pump to the car 12V power supply, connect the exhaust pipe of the exhaust valve to the outlet end of the air bubble, and then open the exhaust valve port; Turn on the power switch of the air pump, and connect the inflation port of the air pump to the object to be inflated.
Check whether the parts of the pump are complete, you can check according to the instructions. 02 Plug the cigarette lighter into the cigarette lighterBefore use, we first confirm whether the maximum current of the car cigarette lighter has reached 15A, if the current exceeds 15A, do not use the cigarette lighter to inflate, so as not to damage the cigarette lighter.
Taking power The vehicle air pump can take power in two ways: through the 12V cigarette lighter interface and through the battery. Connect the air nozzle Screw off the tire air nozzle cover and connect the inflation tube of the air pump to it. After the pump is successfully powered and connected to the air nozzle, the air pressure can be set on the setup panel.
The steps to use the car air pump are as follows: Plug the power plug into the 12V car power supplyThe air outlet of the vehicle air pump is connected to the interface of the object to be inflated. Turn on the power switch, press the start button, start the vehicle air pump, the pump will start to inhale, the outside air compression after inflation. Adjust the gear on the dashboard as needed to achieve different pressure levels.
1. Connect the car air pump to the car 12V power supply, connect the exhaust pipe of the exhaust valve to the outlet end of the air bubble, and then open the exhaust valve port; Turn on the power switch of the air pump and turn on the inflation port of the air pumpConnect to the object to be inflated.
2, it is necessary to start the vehicle, plug the connector on the air pump into the cigarette lighter of the vehicle, power the air pump, and turn on the switch, screw off the air nozzle on the tire, insert the output top of the air pump in the tire air mouth, start to inflate the tire, observe the pressure on the air pump, pull out after reaching the normal value. There are two places where the tire pressure value of the vehicle will show the normal value of the tire pressure of the vehicle, the first place is on the inside of the vehicle fuel tank cap.
3, the car air pump how to use the air pump nozzle to the tire valve, in the clockwise direction to tighten the air nozzle;Insert 12v cigarette lighter into the car cigarette lighter; Press the product switch to the on position to start work; Unscrew the air nozzle and pull out the smoke plug; The wire and gas pipe can be put away.
4, if the car tire pressure is too low or too high, it will affect the normal use of the car, so once the tire pressure is found to be insufficient, it is necessary to inflate the tire as soon as possible, but they do not know how to operate, the following to introduce how to use the car tire pump. First, turn on the power switch, at this time the LED prompt light will be bright, and the vehicle's air pump will be in the standby state.
5, how to use the car air pumpFirst, it is necessary to connect the power supply for the vehicle air pump, and the power supply of the vehicle air pump is usually connected by a cigarette lighter, or directly connected to the battery of the vehicle. Then use the tire pressure monitor of the vehicle air pump to check the tire pressure of the vehicle tire, the tire pressure value of the vehicle tire is generally between 3bar-5bar, and the pressure inside the tire can not be higher than the normal value, nor can it be lower than the normal value.
This is the end of the introduction of how to use the multi-function wireless fast charging pump and wireless fast charging, do not know that you find the information you need? If you want to learn more about this, remember to follow this bookStand. < / p >