This article gives you a talk about how long Huawei wireless desk lamp needs to be charged, and the knowledge points corresponding to Huawei wireless desk lamp gift. I hope it will be helpful to you. Don't forget to collect this site. < / p > < h2 > the article directory list: < / h2 > < ul > < li style = 'margin - bottom: 3 px; list-style: none'>1, How to use Huawei wireless charging desk lamp?
The method of use is as follows: After plugging in the power supply, touch the curved light pole with your finger at any position to light the light. Put the device that needs to be charged under the lamp, switch the mobile phone to the wireless charging mode, and put it into the wireless charging induction area of the lamp. Use the phone charging cable to connect the lamp USB port to the phone, and the phone can also be charged.
How to use Huawei wireless charging desk lamp? Except that it can be turned on and off by touchMachine, there are more detailed adjustment functions on its panel, with a finger gently swipe, you can adjust the brightness of the light stepless, the experience is exactly the same as adjusting the brightness of the mobile phone, and because this operation does not involve mechanical movement, so it will never have wear and aging, no matter how long the experience is the same.
Wireless devices also need power support, but if you can charge wirelessly, you do not need to plug in. The principle of wireless charging lights is to use wireless current. The voltage is placed on a fixed charging device for charging. But the charging disc still needs to be plugged inWhen the wif signal turns green, it indicates a connection. Huawei Technologies Co., Ltd. is a private communication technology company that produces and sells communication equipment. It was officially registered in 1987 and is headquartered in Bantian Huayas, Longgang District, Shenzhen, Middle East Province.
2. Ensure that the power supply of the Huawei table lamp is properly connected, and turn on the table lamp to enable it to be connected. Turn on the WLAN Settings on your phone and make sure you are connected to a wireless network. Search for Huawei Smart Home in the APP store of Huawei table lamp, and download and install it on your phone. Open the Huawei Smart Home APP and log in to your Huawei account. inFind and select the option to add electrical appliances in the APP, and connect Huawei table lamp according to the prompts.
3, Huawei table lamp how to connect to wifi and then long press the lamp switch button for 5 seconds, then the wifi flashes, this time is connected to the wifi state, when the wifi signal turns green, it means that the connection is successful.
4. The method of connecting Huawei table lamp to wifi is as follows: First, open the smart home APP and add the corresponding table lamp device. Then long press the switch button of the lamp for 5 seconds, then the wifi flashes, at this time it is connected to wifi, and the wifi signal turns greenAfter that, the connection is successful.
5. Click the automatically displayed "Bind Device Message" to enter. Turn on the lamp and press and hold the wifi distribution button on the lamp. Click "One-click distribution network", manually enter the WiFi password, click Connect. Wait for the lamp network, when you hear the prompt "I can go online", that is, the network is successful.
The method of Huawei table lamp connecting to wifi is as follows: First open the smart home APP and add the corresponding table lamp device. Then press and hold the lamp to turn it onWhen the shutdown button is pressed for 5 seconds, the wifi blinks, and the wifi is connected. When the wifi signal turns green, the connection is successful.
You need to use Huawei smart home software to connect. Open the Huawei Smart Life APP on your mobile phone, click "" in the upper right corner to select" Add Device ", and click the next step to complete the pairing after discovering the device. After the pairing is completed, the table lamp will appear on the main interface of Huawei Smart Life APP. After opening, you can see the control panel of Taipower. Almost all functions of the table lamp are displayed on the interface, which is clear at a glance.
Huawei table lampThe method of connecting wifi is: first open the smart home APP, add the corresponding lamp device; Then long press the switch button of the lamp for 5 seconds, when wfi flashes, it is in the connected wf state, and when the wif signal turns green, it means connection. Huawei Technologies Co., Ltd. is a private communication technology company that produces and sells communication equipment. It was officially registered in 1987 and is headquartered in Bantian Huayas, Longgang District, Shenzhen, Middle East Province.
The method of connecting the Huawei table lamp to the WiFi is as follows: First, ensure that the power connection of the Huawei table lamp is normal, and turn on the table lamp to enable it to be connected. Turn on the WLAN Settings on your phone and make sure you are connected to a wireless network. Search for Huawei Smart Home in the APP store of Huawei table lamp, and download and install it on your phone. Open the Huawei Smart Home APP and log in to your Huawei account.
Plug in the smart desk lamp. Download the smart home on your phone, enter the app, and add the lamp device. Finally, the connection is successful through Bluetooth.
1, wireless link button, which is an essential button as a smart desk lamp. Through a wireless connection, you can control this writing lamp on your phone. The lamp can be easily folded and stored, and does not take up space when not in use. The charger is also very strong, although the plug does not use the universal USB charging interface, a little pity.
2, the first key on the left. Ottlite is a brand specializing in eye protection lamps. There are two buttons on the left and right sides of the lamp holder of this brand eye protection lamp: the first button on the left is the lamp switch, and the second button on the left is the light mode. The brand eye protection lamp adopts inverter electronic townThe flux increases the electrical frequency from 50Hz to 30-50kHz, and the amplitude of the change in light brightness becomes very small due to the afterglow effect of the phosphor.
3. No. OttliteLED eye protection table lamp, soft light, no glare and no strobe, effectively protect vision and reduce eye fatigue. No. No power storage function, you need to plug in the power to use. Has three brightness, low power consumption, can last for more than 40,000 hours.
4, No. Canadian eye protection lamp ottlite is suitable for different conditions of eye environment, and the wavelength of light of Canadian eye protection lamp ottlite is accurate and balancedBeyond full spectrum lighting. Canadian eye protection lamp ottlite is a lamp with stronger functions than the full spectrum. The light of Canadian eye protection lamp ottlite is soft, no glare, no stroboscopic, and can effectively prevent eye fatigue. Convenient touch switch, three brightness can be adjusted, coupled with the free adjustment of the lamp holder, the design is perfect, cost-effective.
5. The steps for setting the date of ottlite eye protection lamp are as follows: press down/alarm button to enter the alarm setting mode, continue to press down/alarm button to select any group of A1-A8. Use the Up/On key to switch the alarm on /Off status. If the time is displayed as - : --, the alarm clock is disabled. A specific number indicates that the alarm group is enabled.
1. The use method is as follows: After plugging in the power supply, touch the arc light pole with your finger at any position to light the light. Put the device that needs to be charged under the lamp, switch the mobile phone to the wireless charging mode, and put it into the wireless charging induction area of the lamp. Use the phone charging cable to connect the lamp USB port to the phone, and the phone can also be charged.
2, the principle of wireless charging lamp is to use wireless current. The voltage is placed on a fixed charging device for charging. But the charging disc still needs to be plugged in. That's why he charges the wireless charging light. There are many charging devices like this, such as mobile phones can now also achieve wireless charging. It also requires a fixed device that emits after being switched on. The mobile phone can receive the signal to charge the mobile phone wirelessly.
3, How to use Huawei wireless charging desk lamp? In addition to being able to turn on and off by touch, there are more detailed adjustment functions on its panel, using the handRefers to the gentle swipe, you can adjust the brightness of the light stepless, the experience is the same as adjusting the brightness of the mobile phone, and because this operation does not involve mechanical movement, so there will never be wear and aging, no matter how long the experience is the same.
4, in its flat and smooth base panel, you can't see a protruding button, but there is a striking and simple icon, like a mobile phone, with a finger gently touch the power button, you can instantly light up, shutdown operation is the same.
5, very simple, regular discharge. For example, every month (vacationIf there has been no power failure), do not plug in the AC plug, turn on the light, until the light is not bright, indicating that the electricity has been discharged. Plug in the AC power. 6, the general charging lamp can be used for how long, the first charge takes about eight hours, after each charge is almost four or five hours can be used for two to three hours each time. Wireless charging desk lamps are still relatively few in our actual life, and rarely touched.
Huawei table lamp is not necessarily plugged in, not plugged inAgreed. The table lamp generally refers to the lamp with a base on the table, but with the progress of science and technology, the appearance and shape of the table lamp are also constantly developing, and gradually emerged that can be adsorbed in any position of the magnetic table lamp, its small and delicate, easy to carry.
Yes. Huawei's table lamp is not designed to store electricity, so it must be plugged into a power cord to light up. Once the plug is removed, the lamp will be extinguished.
Wireless devices also need power support, but if you can charge wirelessly, you do not need to plug in. Wireless charging lampThe principle is to use wireless current. The voltage is placed on a fixed charging device for charging. But the charging disc still needs to be plugged in. That's why he charges the wireless charging light. There are many charging devices like this, such as mobile phones can now also achieve wireless charging.
Huawei eye protection lamp in the case of no power supply, then all its operation is no longer, so it can not be controlled.
The method of connecting the Huawei table lamp to the WiFi is as follows: First, ensure that the power connection of the Huawei table lamp is normal, and turn on the table lamp to enable it to be connected. Open WLA on your phoneN To ensure that you are connected to a wireless network. Search for Huawei Smart Home in the APP store of Huawei table lamp, and download and install it on your phone. Open the Huawei Smart Home APP and log in to your Huawei account.
The method of use is as follows: After plugging in the power supply, touch the arc light pole with your finger at any position to turn on the light. Put the device that needs to be charged under the lamp, switch the mobile phone to the wireless charging mode, and put it into the wireless charging induction area of the lamp. Use the phone charging cable to connect the lamp USB port to the phone, and the phone can also be charged.
About how long to charge Huawei wireless lamp and Huawei wirelessThis is the end of the introduction of table lamp gift, do not know if you find the information you need? If you want to know more about this, remember to follow this site. < / p >