Today to share with you the jbl wireless headphone case can not charge the knowledge, which will also explain the jbl headphone charging case is not satisfied, if you happen to solve the problem you are now facing, don't forget to pay attention to the site, now start!
< ul>1, the headset can not power on the possible reasons for the following: the charging box is out of power: you can try to put the headset into the chargeIn the box, and make sure that the charging box has been opened, wait for some time to see if it can be charged successfully. Charger problem: Please check whether the charger you are using is the original charger, or whether it has been damaged, you can try to replace the charger and recharge.
2, Bluetooth headset can not be charged, first of all to find the reason. Usually, the Bluetooth headset battery damage caused. Or the charger is damaged. Check the charger Check the Bluetooth headset charger is not in good condition, try to use the original charger to charge the Bluetooth headset. Replace the battery if the charger is good, consider that the Bluetooth headset battery is damaged.You can bring the machine, invoice and wait until the nearby maintenance outlet, test, repair or replace the new battery use.
3, the battery is broken, the charging interface is in poor contact, and the control circuit or chip is damaged. jbl's headphones can only charge to 90 percent of their capacity in one of three ways: the battery dies. The battery is damaged, that is, it cannot be charged, or it is full and it is not used. This is a typical lithium battery failure performance. Just change the battery. The charging port of the Bluetooth headset is in poor contact.
1. The reason why the charging bin is fully charged does not charge the headset: the Bluetooth headset battery is exhausted, and it is excessively used, resulting in the battery being self-protected when charging. The earphones are not in place. You are advised to adjust the position and reinstall it. The charging port of the charging bin (or headset) is in poor contact. If the charging bin (or headset) charging port is in poor contact, it is necessary to contact the seller of the Bluetooth headset in time. Some power banks don't work with Bluetooth headsets.
2, the Bluetooth headset charging bin is not charged on the reason: aging components, moisture, short circuit; Poor contact, charger output voltage is too large or too small; Charging fingerThe indicator light is damaged or the charging bin is broken; The charging panel of the earphone charging compartment is unwelded with the charging port; The charger is damaged and replaced. Components aging, moisture, short circuit and other conditions may appear unusable phenomenon.
3, improper operation Some users in the process of using Bluetooth headphones, found that the charging bin can not be charged. After investigation, it was found that because of their improper operation, they always put back and then take out another headset. The real design is that when both headphones are removed and then put back in either headset, the charging will be triggered. So, if you have a similar problem, take both headphones out first, and then put the one that needs charging into...
4, the headset can not be charged may be caused by the charging bin damage. Solution: The user needs to check whether the Bluetooth headset charger is damaged, and if it is found damaged, you can change the charging bin to charge the Bluetooth headset to try. Bluetooth headset charging should try to use the original charging bin, so as to better protect the battery of the Bluetooth headset, and power is easier to import into the battery inside the headset.
5, you can refer to the following: vivo/iQOO Bluetooth headset or charging case is not charged, please check whether the charging case is powered (indicator light can be lit), andWhether the charging contact at the bottom of the earphone is dirty, if there is dirt, please clean it with dry cloth or dry paper towel; If the vivo/iQOO wireless headset can not be charged, please plug and unplug several times when charging, or replace another charging head and charging cable to see whether it can be charged.
6, may be caused by damage to the charging bin of the Bluetooth headset, this case can check whether the Bluetooth headset charger is damaged, if found damaged can change the charging bin to charge the Bluetooth headset to try. Bluetooth headset charging should try to use the original charging bin, so as to better protect the Bluetooth headset battery, power is moreWhat is the reason why the charging bin of Bluetooth headset cannot be charged?
The reason why the charging bin is fully charged does not charge the headset: the Bluetooth headset battery is exhausted, and it is excessively used, resulting in the battery being self-protected when charging. The earphones are not in place. You are advised to adjust the position and reinstall it. The charging port of the charging bin (or headset) is in poor contact. If the charging bin (or headset) charging port is in poor contact, it is necessary to contact the seller of the Bluetooth headset in time. Some power banks don't work with Bluetooth headsets.
Reasons for charging the Bluetooth headset: aging components, moisture, short circuit; Poor contact, charger outputThe voltage is too large or too small; The charging light is damaged or the charging bin is broken; The charging panel of the earphone charging compartment is unwelded with the charging port; The charger is damaged and replaced. Components aging, moisture, short circuit and other conditions may appear unusable phenomenon.
If the vivo/iQOO Bluetooth headset or charging case is not charged, please check whether the charging case is charged (whether the indicator light is on), and whether the charging contact at the bottom of the headset is dirty. If there is dirt, please clean it with dry cloth or dry paper towel; If the vivo/iQOO wireless headset can not be charged, please plug and unplug several times when charging, or replace another charging headAnd charging cable to see if it can be charged.
may be caused by damage to the charging bin of the Bluetooth headset. In this case, you can check whether the Bluetooth headset charger is damaged. If you find damage, you can change the charging bin to charge the Bluetooth headset to try. Bluetooth headset charging should try to use the original charging bin, so as to better protect the battery of the Bluetooth headset, and power is easier to import into the battery inside the headset.
The introduction of jbl wireless headphone case can not be charged and jbl headphone charging case is over. Do you know if you can find the information you need?If you want to know more about this, remember to follow this site. < / p >