If the charging gun is properly connected but cannot be charged, it may be caused by a fault in the charging gun. For example, the charging gun line short circuit, charging interfaceFault, charging gun parts damaged, etc. In this case, you need to repair or replace the charging gun. If it is not the problem of the charging gun, it may also be the fault of the charging device itself, resulting in the failure of the charging gun to charge.
In addition, problems with the battery itself, such as a broken fuse, can also lead to failure to charge and need to replace the fuse to return to normal. If the charging pile can not be charged after replacement, then the problem is likely to be in the new energy vehicle itself. Finally, it is also necessary to check whether the battery is faulty or whether the jack is well connected, and whether there is a problem with the fit of the car model and the charging pile.
Household image front charge installation point open use. In the price app store, search for home elephant front charge download. After the download is completed, click the charging pile finder that can easily self-charge and self-settle payment through the interaction between the APP and the charging pile.
itemThe former mainstream charging pile is charged per unit of electricity measurement, one degree of electricity in different regions have different prices, generally concentrated between 6 yuan and 8 yuan, 200 kilometers of new energy vehicle battery capacity is about 31 KWH, that is, about 31 KWH of electricity, so it takes about 46 yuan to 58 yuan to full a charge.
In order to easily find nearby charging stations, you can use mobile phone map software. Take Amap as an example, just enter "charging station" in the search box, and information about nearby charging piles can be displayed, including the specific location, the number of vacancies and the price of electricity. Mainstream charging pile brands in the market includeNational grid, special calls, star charging, etc. In addition, there are some other brands, such as small orange charging, Tesla charging pile, like front charging, Wancheng Wancharging and so on.
Connect the charging pile: Turn on the switch of the charging pile, insert the charging gun of the electric vehicle into the charging pile, and lock the electric vehicle. Operation charging: According to the prompts of the charging pile, operate the relevant menu, select the amount of electricity to be charged on the charging pile, and then press the button to start charging, at this time the electric vehicle battery will start charging.
Park the vehicle and turn it on to chargeInterface, and plug the charging gun on the charging pile into the charging interface. After the charging pile is successfully connected to the vehicle, you can click the charging pile display or the vehicle screen to start charging. Consumers can choose the appropriate charging method according to their actual conditions (such as scanning code charging, swipe card charging), click the corresponding charging method of the button.
Before using the charging pile to charge, it is also necessary to swipe the card or scan the code. Some charging piles need to handle the charging card in advance, at this time, you need to swipe the card first; Some charging piles require scanning codes, and only by scanning the correct two-dimensional code can they start charging. Correct card or code scanning operation canEnsure the smooth progress of subsequent charging. After swiping the card or scanning the code successfully, you need to connect the charging gun to the electric vehicle.
You can choose to recharge at the administrator, or recharge online by scanning the QR code on the card, which is very convenient. When charging, plug the electric car charger into the corresponding socket and remember the socket number. Then, put the power card in the card sensing area of the charging pile host, enter the charging socket number and confirm, you can start charging.
Public charging piles usually have two charging methods: swipe card charging and scan code charging. If you want to charge by swiping your card, make sure the administrator has activated your card or go directly to the administrator to recharge it. Another way is to charge by scanning code, you need to plug the charger into the socket first and then scan the QR code to recharge. Charging steps: Before starting to use the charging pile, you first need to connect the charger socket of the electric vehicle and remember the socket number.
Each charging pile has a lot of sockets, choose a free socket, use the charger to link the socket and the charging port of the battery car. There's a QR code next to each outlet,Scan the QR code with your phone and follow the official accounts. After scanning again, the charging page will appear. Generally the first charge, you need to recharge first. Click Top Up to add the required amount to your account. After the recharge is completed, return to the charging interface and click Charge.
Confirm the charging mode of the electric pile. When charging electric vehicles, the general concept is to use a fixed charging mode, which can be used either fast or slow charging mode. Fast charging power is generally higher, charging time is shorter; And slow charge power is lower, chargingThe time is longer. Connect the charger. When connecting the electric pile, you need to connect the charger to the entrance of the electric pile, and then plug the cable plug of the electric pile into the charging interface, and secure the charger.
Check that the power indicator of the charging pile is normal and no fault information is displayed. Check that the charging cable is not damaged, the charging head is normal in appearance, and the charger lock can be closed normally. Park the vehicle in the designated area, unplug the key and make sure the power is off. Step 2: Connect the charger Note: Before connecting, make sure that the interface is free of obvious water, water droplets and debris, and the connection is good and firm.
Step 1: Check the charging pile and vehicle:Charging pile power indicator power supply is normal, no fault warning. The charging cable is not damaged, the charging head is normal in appearance, and the charger lock can be closed normally. Park the vehicle in the designated area, unplug the key and make sure the power is off. Step 2: Connect the charger Note: Before connecting, please ensure that the interface has no obvious water, water droplets and debris, and the connection is good and firm. Step 3: Click Start Charging.
Before using the charging pile to charge, it is also necessary to swipe the card or scan the code. Some charging piles need to handle the charging card in advance, at this time, you need to swipe the card first; Some charging piles require scanning codes, and only by scanning the correct two-dimensional code can they startCharge up. Correct card or code scanning operation can ensure the smooth progress of subsequent charging. After swiping the card or scanning the code successfully, you need to connect the charging gun to the electric vehicle.
First open the vehicle charging port. Press above the logo in the middle, and the charging port will automatically pop open. After popping open, there is a cover inside. Gently flip the right switch to open the cover. Then the National Grid fast stun gun is removed from the charging pile. When taking out the charging gun, remember to press down on the button on the charging gun.
First, in order to charge your electric vehicle in the community, follow these steps:Apply for a charging card In order to use the charging station, you need to apply for a charging card from the property or safety inspection office of the community. Please bring the charging pile operation manual, vehicle registration certificate, and valid ID card to apply and pay the relevant fee to open the use right.
After parking the vehicle, open the charging interface, and unplug the charging gun on the charging pile and insert it into the charging interface. After the charging pile is successfully connected to the vehicle, you can click the charging pile display or the vehicle screen to start charging. Consumers can choose the right charge according to their actualElectrical mode (such as scanning code charging, swipe card charging), click the button corresponding to the charging mode.
Connect the charging pile: turn on the switch of the charging pile, insert the charging gun of the electric vehicle into the charging pile, and lock the electric vehicle. Operation charging: According to the prompts of the charging pile, operate the relevant menu, select the amount of electricity to be charged on the charging pile, and then press the button to start charging, at this time the electric vehicle battery will start charging.
Swipe card or scan code Before using the charging pile to charge, you also need to swipe card or scan code. Some charging piles need to handle the charging card in advance, at this time, you need to swipe the card first; And some charging pilesIt is required to scan the code, and only the correct two-dimensional code can be swept to start charging. Correct card or code scanning operation can ensure the smooth progress of subsequent charging. After swiping the card or scanning the code successfully, you need to connect the charging gun to the electric vehicle.
You can choose to recharge at the administrator, or reload online by scanning the QR code on the card, which is very convenient. When charging, plug the electric car charger into the corresponding socket and remember the socket number. Then, put the power card in the card sensing area of the charging pile host, enter the charging socket number and confirm, you can start charging.
Step1: Check the charging pile and the vehicle: the power indicator of the charging pile is normally powered, and there is no fault warning. The charging cable is not damaged, the charging head is normal in appearance, and the charger lock can be closed normally. Park the vehicle in the designated area, unplug the key and make sure the power is off. Step 2: Connect the charger Note: Before connecting, please ensure that the interface has no obvious water, water droplets and debris, and the connection is good and firm. Step 3: Click Start Charging.
First open the vehicle charging port. Press above the logo in the middle, and the charging port will automatically pop open. After popping open, there is a cover inside. Gently flip the right switch to open the cover. After the national gridThe quick stun gun is removed from the charging pile. When taking out the charging gun, remember to press down on the button on the charging gun.
How to charge the introduction of Jiangxi wireless charging pile talk here, thank you for taking the time to read the content of the site, more about Jiangxi battery car intelligent charging pile, Jiangxi wireless charging pile how to charge the information don't forget to find in the site oh.