1, first of all, we need to find a suitable position in the front row of the vehicle to install the bracket, this position should be convenient for the driver to view, convenient for the driver to take, but also does not affect the use of other functions of the car. Once you have found a suitable spot, wipe the spot with the "wipe" that comes with the set. After wiping, use the "drWipe the area with a "y" paper towel to remove excess water.
2, Find the right location: First, choose a suitable location to install the phone stand. In general, choose a position that is comfortable and easy to operate away from the driver, such as on the dashboard or the central console. Prepare the installation tools: Prepare the required tools, usually only a screwdriver and a few setting screws. Clean the installation position: Clean the installation position with a soft cloth to ensure that it is free of dust and debris.
3, select the location: select the position suitable for installing the mobile phone bracket in the vehicle. Clean and prepare: CleanAnd dry the selected installation location. Install a suction cup support: To install a suction cup support, apply a small amount of water to the bottom of the suction cup, then firmly press the suction cup to the clean surface, and place the mobile phone support at an appropriate Angle and position.
4, preparation: First of all, arrange the components of the car phone holder to ensure that no accessories are missing. Choose the installation location: according to personal habits and the need for convenient use, choose a suitable location to install the car phone holder, such as the car dashboard, the center console or the front windshield of the vehicle.
5, the specific steps of the car mobile phone bracket installation are as follows: First, needTo find a suitable position for the installation of the bracket in the front row of the vehicle, this position should be convenient for the driver to view, convenient for the driver to take, but also does not affect the use of other functions of the vehicle. Once you have found a suitable spot, wipe the spot with the "Wipe" tissue that comes with the set, as shown.
6, the use of car mobile phone holder can easily view mobile phone navigation or talk in the car. The following is the use of the car phone holder: The first step: Prepare the air outlet phone holder and the air outlet fixing foot. Make sure these parts are intact and fit the size of the outlet for your vehicle. Step 2: Rotate the back of the frameid=' Beisi car phone stand how to install '> BEisi car phone stand how to install
Use clip holder: Use the clip holder and use the adjustment device to place the phone holder at the appropriate Angle and position.
The support and fixing feet for the air outlet are ready. Secondly, there will be a fixing knob on the back of the mobile phone stand connecting the bracket and the fixing foot, and gently turn the knob open. Put the fixed foot into the bayonet with the support, and then tighten the knob to try to pull out so as not to fall off after installation. Finally, select the appropriate air outlet, press the shrapnel on the fixed foot,The fixation is complete.
First fix the support base on the flat surface. Next, insert the support handle into the base. The head of the stand is then attached to the phone. Finally, stretch the stand to both sides of the phone screen so that it is fixed to the base.
The installation method of the car phone bracket: the bracket and the fixing foot of the air outlet are ready; At the back of the mobile phone stand, there will be a fixing knob connecting the stand and the fixing foot. Gently turn the knob open; Put the fixed foot in with the bracket bayonet, andTighten the knob and try to pull it out so as not to fall off after installation. Select the appropriate air outlet and press the shrapnel on the fixing foot to complete the fixing.
There are many ways to install: you can directly card to the air outlet above. It can also be pasted on the decorative board of the central control. It can be installed on the rear view mirror of the vehicle. Mainly according to the type of mobile phone holder to determine the installation, all the installation of the vehicle is not any impact, will not cause damage to the vehicle parts.
Find the right location: First, choose a suitable location to mount the phone holder. In general, choose to leaveA position where the driver is comfortable and easy to operate, such as on the dashboard or on the central console. Prepare the installation tools: Prepare the required tools, usually only a screwdriver and a few setting screws. Clean the installation position: Clean the installation position with a soft cloth to ensure that it is free of dust and debris.
First, prepare your car mobile phone holder and supporting fixed accessories. Check the phone holder and find the retainer knob on the back end, which is the part that connects the holder to the retainer foot. Gently rotate the knobs to split them. Next, assemble the brackets and fixing feet together, making sure they are properly aligned. Then insert the assemblyInto the car air conditioning outlet buckle.
Preparation: First of all, it is necessary to arrange the components of the car phone holder to ensure that no accessories are missing. Choose the installation location: according to personal habits and the need for convenient use, choose a suitable location to install the car phone holder. Common installation locations include vehicle dashboard, center console, vehicle front windshield, etc.
About how to install the fast charging wireless car phone stand and how to use the car wireless charging phone stand this is the end of the introduction, do not know you find the information you need? If you want to know more about thisSurface information, remember to collect attention to this site. < / p >