Today to share the knowledge of Lynk & Co 01 wireless fast charging bracket, which will also explain the efficiency of Lynk & Co car wireless charging, if you happen to solve the problem you are facing now, don't forget to pay attention to the site, start now!
< ul>Change a charging pile. Lynk & Co cars also support home 220-volt charging, with a home charging head. It just doesn't support fast charging. Top up less than 100 percent, 80 percent at most. And hurt the battery, slow charge is better for the battery is to experience the low temperature in winter.
is not common. Can only use their own charging pile charging, charging outsideThe actual electric pile can not be charged, to the 4s shop asked the next, the maintenance personnel said that the charging port of Lynk is really different, and the charging pile outside may not be able to be charged.
Charging pile use method introduction -- Method first step, connect the charging gun to find the electric vehicle charging interface, and then the plug on the charging gun (similar to the refueling gun), ** to the electric vehicle charging interface, here need to pay attention to the connection before please confirm that there is no water in the interface, and be sure to plug tightly. Step 2: Click Start charging After the charging pile is successfully connected to the electric vehicle, click the Start charging button on the screen.
Linke 01PhevThe degree is relatively slow, but the safety factor is high. The charging time can take several hours before the battery is fully charged. In contrast, 380 volt fast charging devices can significantly improve efficiency, generally only five to two hours to complete the charge.
2, for Lynk & Co 01 PHEV owners, if you need to charge at home, you can consider using the Pounod portable charger. When the charger fails to light up, it may be due to the ungrounded socket. The Punode charger is a solution that comes with a leakage protection feature that allows smooth charging even if the socket has no grounding cable.
3, Lynk & K 01Phev uses third-party charging technology, which may lead to compatibility problems with State grid charging piles. During the charging process, the vehicle needs to be stopped and turned off, and it will automatically stop once it starts charging, which may be one of the reasons why it cannot be charged normally. Therefore, for the smooth charging process, we recommend the use of special charging piles. Due to the limitations of third-party technology, there may be some challenges when using State grid charging piles.
4, Lynk & Co 01 hybrid models support charging directly through the 220V household socket, and the car is presented with a 10A, 6kW chargerThe charging speed is about 6 KWH per hour. For those who are looking for efficiency, you can choose to buy a 3kW portable charger under the brand of Punode.
1, Lynk & Co 01PHEV as a gas-electric hybrid model, its endurance performance is commendable. Its fuel tank capacity is large, making the driving range is significant, usually, only two charging a week, compared with pure electric vehicles, its charging frequency is moreIt's convenient. The charging time depends largely on the power of the charging pile used. In fast charge mode, it takes about 1 to 2 hours to fully charge, while slow charge takes 4 to 6 hours.
2, about Lynk & Co 01 hybrid version charging options Lynk & Co 01 hybrid model support direct charging through the 220V household socket, the car is presented with a 10A, 6kW charger, charging speed of about 6 degrees per hour. For those who are looking for efficiency, you can choose to buy a 3kW portable charger under the brand of Punode.
3, volt household charging pile, although the charging speed is relativeSlower, but safer. The charging time can take several hours before the battery is fully charged. In contrast, 380 volt fast charging devices can significantly improve efficiency, generally only five to two hours to complete the charge. For the battery, the 380 volt charging method has little impact, which is suitable for users who pursue efficiency.
4, the onboard battery capacity is 4kWh, and it takes about 5 hours to fully charge. In pure electric mode, it can achieve a comprehensive range of 51 kilometers, and the maximum comprehensive range is a staggering 992km.
5, use the charger from 1The time from 5% to full charge is about 78 hours. In addition, the Lynk & Co 01 PHEV hybrid has a battery capacity of 9KWH. In terms of charging piles, there are two types of floor-to-ceiling charging piles and wall-mounted charging piles. The floor type charging pile is suitable for installation in the parking space that is not near the wall, while the wall type charging pile is suitable for installation in the parking space near the wall.
6, yes, because the Lynk 01phev is full and then charged - to two hours is the best, so that it can be full, and finally can not exceed eight hours after full. After two hours of full charge, there is no need to charge the Lynk 01phevFull charge does not draw the gun, although it does not cost much electricity, but it is not good for the charger, and being in the working state for a long time will affect the life.
1, not supported, I see the State grid has DC and AC two kinds of charging, DC has a charging line, but the interface is not the same as the collar and K, can not plug, AC words even no charging line, may need to buy their own line, there is no conversion head, so as to achieve DC charging pile to the collar and K charge. Lynk & Co 01 is the first to be developed based on the CMA basic module architectureThe model of the car. Lynk & Co 01 is a new era SUV for young urban groups, which was officially launched on November 28, 2017.
2, for the charging strategy of Lynk & Co 01PHEV, there are two main options: 220 volt and 380 volt fast charging. 220 volt household charging pile, although the charging speed is relatively slow, but the safety factor is high. The charging time can take several hours before the battery is fully charged. In contrast, 380 volt fast charging devices can significantly improve efficiency, generally only five to two hours to complete the charge.
3, charging time to a large extentIt depends on the power of the charging pile used. In fast charge mode, it takes about 1 to 2 hours to fully charge, while slow charge takes 4 to 6 hours. This charging speed is quite efficient for most owners and is enough to meet the needs of daily use. It is worth mentioning that the Lynk & Co 01PHEV is also equipped with intelligent charging function.
4, Lynk & Co 01 hybrid models support direct charging through the 220V household socket, the car is presented with a 10A, 6kW charger, charging speed of about 6 degrees per hour. For users who pursue efficiency, they can choose to buy the 3k of the Punode brandW Portable charger.
5, Lynk & Co 01Phev uses third-party charging technology, which may lead to compatibility problems with the State grid charging pile. During the charging process, the vehicle needs to be stopped and turned off, and it will automatically stop once it starts charging, which may be one of the reasons why it cannot be charged normally. Therefore, for the smooth charging process, we recommend the use of special charging piles. Due to the limitations of third-party technology, there may be some challenges when using State grid charging piles.
The introduction of Lynk & Co 01 wireless fast charging bracket is here, thank you for taking the time to read thisStation content, more information about the charging efficiency of Lynk & Co car wireless charging, Lynk & Co 01 wireless fast charging stand Don't forget to find out in the station.