This article gives you a talk about Lynk 03 wireless charging does not charge into the electricity, and Lynk 03 wireless charging does not charge into the corresponding knowledge points, I hope to help you, do not forget to collect this site. < / p > < h2 > the article directory list: < / h2 > < ul > < li style = 'margin - bottom: 3 px; list-style: none'>1, Link&CO wireless charging how to use
For wireless charging of a Lynk & Co 06 phone, you can follow the following steps: First, you need to make sure that there are no objects on the surface of the WPC. Next, tap on features -- Settings -- on the central displaySmart Connectivity - NFC and wireless phone charging. In this interface, click mobile phone wireless charging to activate/deactivate the function. Finally, place the phone in the center of the charging pad to start charging.
[Pacific Automotive network] Lynk & Co wireless charging open method: function-setting - intelligent interconnection - mobile phone wireless charging open, put the mobile phone in the center of the charging board can be charged. Lynk & Co has a wireless charging function for mobile phones. If the phone supports the wireless charging protocol or has a wireless charging case connected to the phone, it can be charged on the sub-dashboard charging pad. Compared to charging cable charging, wireless chargingThe speed will be much slower and can only be used as an emergency.
First, click the function control key on the central display. Then, scroll down the page, find and click the Settings option. In the Settings menu, locate and enable the Smart Connect feature to ensure that the nfc and wireless charging options are turned on. Please note that this feature is only available on 2020 Lynk & Co models. As a compact SUV, the Lynk & Co 01's body dimensions are: 45,92mm in length, 1879mm in width and 1628mm in height.
Step 1: Operate the central display! -- Displayed in the center of the vehicleOn the screen, find and click the function button to enter the Settings menu. Step 2: Go to the Settings screen! -- Scroll down the page, find and click the Settings option to go to detailed Settings. Step 3: Enable wireless charging! -- In the Settings screen, explore and click the "Smart Internet" option to turn on the wireless charging function.
First, find and click the function button on the central display, then scroll down the page until you find and enter the Settings screen. On the Settings page, select the Smart Internet option, then turn on NFC and wireless charging. The value of this technology is that it allows the owner to do the driving>
1, to set the wireless charging function of Lynk & Co 03, you need to follow the following steps: ensure that there is no object on the surface of the WPC, and then click the function button on the central display. Swipe down the page to find Settings, then tap Features, Settings, Smart Connect, NFC and wireless phone charging on the central display. Click mobile phone wireless charging to activate/deactivate the function; Place the phone in the center of the charging pad to start wireless charging.
2To enable wireless charging for Lynk & Co 03, follow these steps: Step 1: Operate the central display! -- On the central display of the vehicle, find and click the function button to enter the Settings menu. Step 2: Go to the Settings screen! -- Scroll down the page, find and click the Settings option to go to detailed Settings. Step 3: Enable wireless charging! -- In the Settings screen, explore and click the "Smart Internet" option to turn on the wireless charging function.
3, the wireless charging function of Lynk & Co 03 is very convenient to set up. First of all, please ensure that the surface of the WPC wireless charging board is clean and free of foreign objects, which is forEnsure charging efficiency and safety. Then, easily click the function button on the central display to enter the vehicle's Settings interface. In the Settings menu, you need to swipe down the page, find and click "Features", "Settings", "Smart Internet" in turn.
4, first of all, find the storage tank under the center console, this is the wireless charging location. Next, gently place the phone in the wireless charging area, making sure that the phone is in close contact with the charging pad. At this time, you do not need to plug the phone into any cable or plug, just wait for a moment, the phone will automatically start charging. The wireless charging technology used in the Lynk & Co 03It transmits power through wireless means, eliminating the bondage of traditional charging cables.
5, first, find and click the function button on the central display, and then scroll down the page until you find and enter the Settings screen. On the Settings page, select the Smart Internet option, then turn on NFC and wireless charging. The value of this technology is that it allows the owner to drive without frequently inserting the charging cable, effectively avoiding the charging problem caused by damage or loss of the charging cable.
1. The charging function is not enabled. The mobile phone is charged through the wireless charging board in the front of the vehicle, and the wireless charging function needs to be turned on in the vehicle system to realize the wireless charging function of the mobile phone. In the vehicle system, enter the function menu, open the Settings option, select Intelligent interconnection, select NFC and mobile phone wireless charging at the bottom of the menu, and turn on the wireless charging, the owner can operate by himself.
2. When the 12V battery charging fault icon flashes during the running of Lynk & Co vehicles, it indicates that there may be hidden problems in the charging system and immediate action is required to solve them. This warning usually appears on the generic iconIt is a symbol of the charging system failure, be sure to stop and check immediately. If you see the charge warning light on, be sure to stop in a safe place and turn off the engine, the first task is to check the alternator belt.
3, V battery charging fault icon is not a common risk warning icon, generally as shown in the picture applied to the universal icon of Lynk & Co. This icon represents the meaning: when driving, if the charging warning light is on, please stop safely as soon as possible, please turn off the engine and check the alternator belt.
4, Lynk 02 display voltage is too low charging failure can do this: contact 4SThe store removed the battery and recharged it. Or check whether the charging cable or charging head is faulty, resulting in charging failure.
5, First of all, it is crucial to check the battery. After trying to charge continuously for two hours, disconnect the charger and observe the battery power change. If the battery is full, it indicates that the battery is functioning properly and can be charged normally. However, if there is no significant increase or decrease in power, this may imply that the battery itself is faulty and needs to be replaced in time.
1. ThinkTo set up the wireless charging function of the Lynk & Co 03, follow these steps: Make sure there are no objects on the surface of the WPC, and then click the function button on the central display. Swipe down the page to find Settings, then tap Features, Settings, Smart Connect, NFC and wireless phone charging on the central display. Click mobile phone wireless charging to activate/deactivate the function; Place the phone in the center of the charging pad to start wireless charging.
2, To enable wireless charging for Lynk & Co 03, please follow these steps: Step 1: Operate the central display! -- On the center display, look forGo to and click the function button to enter the Settings menu. Step 2: Go to the Settings screen! -- Scroll down the page, find and click the Settings option to go to detailed Settings. Step 3: Enable wireless charging! -- In the Settings screen, explore and click the "Smart Internet" option to turn on the wireless charging function.
3, the wireless charging function of Lynk & Co 03 is very convenient to set up. First of all, please ensure that the surface of the WPC wireless charging board is clean and free of foreign objects, which is to ensure charging efficiency and safety. Then, easily click the function button on the central display to enter the vehicle's Settings interface. In the Settings menu, youNeed to slide down the page, find and click "function", "Settings", "smart Internet".
4, first, find and click the function button on the central display, and then scroll down the page until you find and enter the Settings screen. On the Settings page, select the Smart Internet option, then turn on NFC and wireless charging. The value of this technology is that it allows the owner to drive without frequently inserting the charging cable, effectively avoiding the charging problem caused by damage or loss of the charging cable.
5, need to ensure that there are no objects on the surface of the WPC. Click center displayOn-screen functions -- Settings -- Smart Connectivity -- NFC and wireless phone charging. Tap mobile phone wireless charging to activate/deactivate the feature. Place the phone in the center of the charging pad. After the charging of Lynk & Co 03 wireless mobile phone starts, it will be displayed at the bottom right of the screen, and stop charging when the phone is full.
6. First, click the function option key on the central display. ! Then, scroll down the screen, find and tap the Settings option. On the Settings screen, ensure that the intelligent interconnection function is enabled and the nfc and wireless charging functions are activated. It should be noted that the above steps apply to the 2021 compact modelCar - Lynk & Co 03. The body size of this model is: length 4639mm, width 1840mm, height 1472mm! -- The wheelbase reaches 2730mm.
To set up the wireless charging function of Lynk & Co 03, you need to follow these steps: Make sure that there are no objects on the surface of the WPC, and then click the function button on the central display. Swipe down the page to find Settings, then tap Features, Settings, and Intelligence on the central displayConnected, NFC and wireless phone charging. Click mobile phone wireless charging to activate/deactivate the function; Place the phone in the center of the charging pad to start wireless charging.
To enable wireless charging for Lynk & Co 03, follow these steps: Step 1: Operate the central display! -- On the central display of the vehicle, find and click the function button to enter the Settings menu. Step 2: Go to the Settings screen! -- Scroll down the page, find and click the Settings option to go to detailed Settings. Step 3: Enable wireless charging! -- In the Settings screen, explore and tap the "Smart Internet" option to turn on wireless chargingFunction is OK.
First, find and click the function button on the central display, then scroll down the page until you find and enter the Settings screen. On the Settings page, select the Smart Internet option, then turn on NFC and wireless charging. The value of this technology is that it allows the owner to drive without frequently inserting the charging cable, effectively avoiding the charging problem caused by damage or loss of the charging cable.
The introduction of Lynk & Co 03 wireless charging does not enter the electricity is here, thank you for taking the time to read the content of this site, more about Lynk & Co 03 wireless charging does not enter the electricity how to do,Lynk 03 wireless charging does not charge the information do not forget to find in the site oh.