中文English
Today to share the knowledge of Mofei juice cup wireless battery charging, which will also explain how to charge Mofei juice cup, if you happen to solve the problem you are now fa...

Mobile juice cup wireless battery charging (Mobile juice cup how to charge)

Today to share the knowledge of Mofei juice cup wireless battery charging, which will also explain how to charge Mofei juice cup, if you happen to solve the problem you are now facing, don't forget to pay attention to the site, now start!

< ul>
  • 1. How come the Muffy juicer can't be charged?
  • 2, Compared to the old model, what are the highlights of the new Mofei portable juicer MR9800?
  • 3, Moffy juice glass, full of electricity, press twice just red light, but does not turn?
  • 4, Excuse me: Mofei new portable juice cup how to charge? How about endurance?
  • 5. How to use the wireless charging of the new Moffy juicer cup?
  • 6, How to charge a Muffle Juicer
  • How come the Muffy juicer can't be charged?

    The reasons for the charging and charging of the Mofei Juicer are as follows: The juicer has a problem; Charging line circuit short circuit; The charger may be plugged in the wrong way, the socket is not plugged in; If this problem occurs in life, please check in the following way: power on again, check the wire and power supply, if it is still not good, it is a hardware problem, and can only be sent to the repair service station for maintenance.

    If you do not charge the Muffy juice cup, first check whether the charging jack is inserted backwards or damaged, and try to replace the new charging jack. Then check whether the mains socket is powered on, no power will lead to no charge. Then check whether the power line is broken, the motorWhether it is damaged and whether the control circuit has components burned out, according to the specific situation to deal with.

    The reason why the juice glass is flashing red is that it is not fully charged, fully charged will be green or blue, if it is always red, it is recommended to go to after-sales maintenance. The juice cup must be well positioned for the charging base limit position, and the white light blinking indicates that in the charging process, the juice cup must be turned upside down on the base, with the lid facing down.

    The reason why the 9600 can not be charged after the battery is replaced is that the components of the juice cup control board are in contact with liquid or damp, which is easy to lead to short circuit, and the charging will not be charged.We can repair the control panel. The plug of the juicer cup is damaged, you can replace it with a new plug. Is the juice cup motor damage, repair the motor can be.

    Compared to the old model, what are the highlights of the new Mofei portable juicer MR9800?

    1, talk about the use of it, compared with the old MR9600, the new MR9800 basic functions have not changed, but added two new features: wireless induction charging battery life upgrade. Wireless induction charging: Put the cup upside down in the baseOn, you can charge directly. I also got a hidden skill these days, that is, if the phone is out of power, you can also put the inductive charging on this base, provided that your phone has the inductive charging function.

    2, design and color: the new model has four colors, the new soft fog cup body design, more light luxury; The cup body is designed without silicone and string, more like an everyday cup. Inductive charging: The new model is inductive charging (send induction base), the old model uses magnetic charging, charging will be more convenient. Performance upgrade: Battery capacity increased to 2400mAh, battery life increased by 50%, fullPower squeeze 15 cups (old model can squeeze 10 cups).

    3, compared with the old MR9600, I personally prefer the new design, any shot is full of advanced sense! The height of the cup body is about 16cm, the maximum diameter of the top is about 3cm, the bottom diameter is about 3cm, and the size is no different from the thermos cup.

    4, Mofei juice cup mr9800 how to use magnetic induction wireless charging, no connection can be charged, easy. Equipped with two 1200mAh supercharged power lithium batteries under full charge, continuous fresh pressing up to 15 cups. Idling speed about 1700015%RPM, super power 40 seconds fresh squeeze, lock delicate nutrition, state READY at any time.

    5, Mofei new portable juice cup MR9800 can be wireless charging, and it is very convenient to charge, in the room can be adapted to the AC charger, in the car can be connected to the car charger, in the outdoor can also be connected to the charging treasure. Compared with the old model, the battery life has increased by 50%, and it is full of 15 cups of electric energy, which is a long battery life.

    Muffy juice glass, full charge, press twiceIt's just a red light, but it doesn't turn?

    1, the Moffy juice cup encountered a red light but did not turn during use, which may be due to the battery is not full. When the charging indicator turns green or blue, it means that the battery is full, and it should work normally. If the red light is always displayed, it may be a charging problem, and it is recommended to seek after-sales professional maintenance services. During the charging process, make sure the juicer cup is properly placed on the charging base.

    2, Double click on the Muffy juice cup does not start and the red light flashes, there may be the following possible reasons: insufficient power: Muffy juice cupDouble click does not start flashing red, may be because of insufficient power, need to charge in time. It is recommended to check the juice cup power and charge it for 1-2 hours. Incorrect button operation: Another possible cause is the incorrect operation of the double click button. Make sure that the double-click operation is accurate, and the interval is about 1 second.

    3, Moffy juice cup double click does not start the red light may have the following reasons: Battery power is insufficient: If the battery power is insufficient, the juice cup may not work properly. You can try charging the juicer cup before trying to start it. Body not properly assembled: If the body of the juicer cup is not properly assembled, it may causeThe juicer cup won't start. You can check that the fuselage is properly assembled and that the lid is tightly closed.

    4, the juice cup red light flashing is not fully charged, fully charged will be green or blue light, if the red light has been recommended to after-sales maintenance. The juice cup must be well positioned for the charging base limit position, and the white light blinking indicates that in the charging process, the juice cup must be turned upside down on the base, with the lid facing down.

    5, if you find that the Moffy juice cup does not start after double-clicking and the red light flashes, it may be caused by insufficient power. Not using it for a long time or running out of power may cause the cup bodyUnable to respond to double clicking the start button. The solution is to charge it for 1 to 2 hours and then try double-clicking it again. In addition, improper operation can also cause the problem, such as the double click interval is too long or the speed is too fast.

    Excuse me: Mofei new portable juice cup how to charge? How about endurance?

    Using the wireless charging dock included with the product, connect one side of the dock to a 5V/1A USB adapter. After connecting to the power supply, the LED indicator on the wireless base will light white once, and thenIf off, the base enters the standby state. Place the Muffy cup upside down on the wireless base, at which point the LED light on the base will start flashing rapidly, indicating that the muffy is charging. The flashing frequency is about once per second.

    Charging with wireless base. The Mobile juicer Cup, launched by the British household appliance brand, is shaped like a water cup and can be carried around. It is a rechargeable portable juicer cup. When the product is out of power, the built-in wireless base charging cable can be connected to the standard adapter on one side and the wireless base on the other side. After connecting the power supply, the LED light on the base shows white once and then goes outThe standby status of the wireless base is displayed.

    The charging steps of the product are as follows: Tools: USB charger, Moffy juice cup, etc. Get a USB charger or USB port for your computer. Plug the charging cable of the Murphy juice cup into a USB charger or USB port on your computer. Insert the Moffy juicer cup into the other end of the charging cable. When charging, the indicator light of the Moffy juice glass will light up, indicating that it is charging. When the indicator is off, it indicates that the charging is complete.

    Mofei new portable juice cup MR9800 can be wireless charging, and it is very convenient to charge, in the room can be adapted to AC charger, in the carIt can be connected to the car charger, and it can also be connected to the charging bank outdoors. Compared with the old model, the battery life has increased by 50%, and it is full of 15 cups of electric energy, which is a long battery life.

    Portable juicer cup is simple and convenient, double-click to start, click Stop. Charging is a charging interface with magnetic absorption. Separate fuselage, head for juicer, bottom cup body can be used as juice cup, the material used is food grade PCTG, healthy and safe to use. The top of the mobile juice cup host has a circular switch, double-click to open, click to stop, the design principle of preventing miscontact. The two metal contacts on the side are the charging of the juicer cup.

    I know! I just bought the new Mofei MR9800 juice cup, it uses wireless charging, there is a square wireless charging base, there is a round groove in the middle, charging the juice cup turned upside down in the base of the groove, the beginning of the white light indicates that it is being charged.

    How to use the wireless charging of the new Moffy juicer cup?

    Using the wireless charging dock included with the product, connect one side of the dock to a 5V/1A USB adapter. Once connected to the power supply,The LED indicator on the wireless base will light white once and then go out, indicating that the base has entered the standby state. Place the Muffy cup upside down on the wireless base, at which point the LED light on the base will start flashing rapidly, indicating that the muffy is charging. The flashing frequency is about once per second.

    Connect the built-in wireless base charging cable to a 5V/1A USB standard adapter on one side and the wireless base on the other side. ? After connecting the power supply, the LED light on the base shows white once and then goes off, indicating that the wireless base is in standby state. ? Flip the Murphy juicer cup upside down on the wireless baseThe white light flashing indicates that it is charging, and the frequency of the white light flashing is about 1 second.

    Direct charging: Plug the charging interface at the bottom of the juicer into the power socket, use the matching charger to connect the power supply to the juicer, and ensure that the input voltage of the charger matches the voltage required by the juicer. Wireless charging: Mofei juicer some support wireless charging technology, you can charge the juicer by placing it in the wireless charging area of the charger, this charging method does not need to insert the charging line, only need to connect the charger to the power supply.

    I know! I just bought this new Movil MR9800Juice cup, which uses wireless charging method, has a square wireless charging base, there is a round groove in the middle, when charging the juice cup is turned upside down in the groove of the base, and the white light begins to indicate that it is being charged.

    Moffy Juice Cup mr9800 is a wireless charging model, put the juice cup on the charger can be. Moffy Juice Glass mr9800 Reviews # Very good, quite exquisite. The sensory capacity is slightly smaller. Disadvantages No power adapter. Good quality, used a few times, generally good. I hope it takes longer. Very good. Nice color. Buy and giveFriends. Friends love it.

    How to charge the Moffy juicer

    In-line charging, wireless charging. Direct charging: Plug the charging interface at the bottom of the juicer into the power socket, use the matching charger to connect the power supply to the juicer, and ensure that the input voltage of the charger matches the voltage required by the juicer.

    Charging with wireless base. Mobile Juice cup launched by British home appliance brand Mobile Electric, shaped like a water cup, can be carried around, is a rechargeable portable juice cup, the product can be out of power when the wireless baseThe charging cable is connected to a standard adapter on one side and a wireless dock on the other. After connecting the power supply, the LED light on the base shows white once and then goes off, indicating that the wireless base is in standby state.

    The charging steps of the product are as follows: Tools: USB charger, Moffy juice cup, etc. Get a USB charger or USB port for your computer. Plug the charging cable of the Murphy juice cup into a USB charger or USB port on your computer. Insert the Moffy juicer cup into the other end of the charging cable. When charging, the indicator light of the Moffy juice glass will light up, indicating that it is charging. When the indicator is off, it indicates that the charging is complete.

    The juice cup must be good at the limit position of the charging base, and the white light flashes to indicate that in the charging process, the juice cup must be turned upside down on the base, and the lid side down. Connect the built-in wireless base charging cable to the 5V/1A USB standard adapter on one side, and connect the wireless base on the other side. Turn the Moffy juice cup upside down on the wireless base, and the white light flashes to indicate that it is charging. The frequency of the white light flashes is about 1 second.

    and put the juicer cup on the wireless base to charge. In the daily use of the juice cup, pay attention to the following points: ensure that the cup body and the knife holder are closely connected before installation,