Today to share with you how Apple wireless fast charge can not turn on the knowledge, which will also be the iphone wireless charging can not turn on to explain, if you happen to solve the problem you are now facing, don't forget to pay attention to the site, now start!
< ul>Apple mobile phone can not open the solution: Method 1: charge the phone iphone black screen can not open how to do? First of all, we should check whether the phone has enough battery. If your phone battery is too low, it is likely to causeUnable to turn on. Make sure your phone is fully charged and then try to turn it on by holding down the power button.
If the iPhone is out of power and still can't be turned on after charging, you can try a hard reboot, check the charging cable and charging port, or connect the computer to restore. Hard reboot If your iPhone won't turn on, try a hard reboot first. For iPhone 8 and above, you can quickly press and release the volume button, then quickly press and release the volume - button, and finally hold down the power button on the side until the Apple logo appears.
Let the device againCharge for half an hour. If the device still does not turn on or charge, take the device, charging cable, and charging adapter to an Apple Store or an Apple authorized service provider for evaluation. You can also contact Apple Support. Learn more about what to do if your iPhone or iPod touch can't charge. For additional assistance, contact Apple Support.
In this case, it is recommended to contact Apple's official customer service or authorized repair point for repair. Anyway, for the iPhone the battery is out of oneShow the problem of charging but not opening the machine, you can first try to replace the charging cable and charger, and wait for a period of time to try again after the boot. If the problem persists, you may need to consider battery problems or hardware failures and seek professional repair help. Attached is a beautiful picture, hope the above helps you.
If your iPhone is off and charging and can't turn it on, it could be because the battery is low, the software crashes, or a hardware failure. Low battery: If the phone runs out of power and has been turned off, then it may not turn on immediately, even after plugging in the charger. In this case, you shouldCharger failure: First check whether the charging cable and charger are working properly. Try replacing a reliable charging cable and charger, plug in the phone and see if it charges normally. If the phone still doesn't turn on after replacing the charging cable and charger, the problem may not lie in the charging device itself. Battery problems: After a long period of use, the battery may be aging or damaged.
May be due to the battery has been completely used up, resulting in failure to turn on. Please first connect the phone to the power supply, then you can see the charging sign on the screen. At this point, although the charging starts, the charging needs to be charged to 5%After that, it can be turned on normally. So let the phone charge for a while before trying to turn it on. If the phone has been charged for a long time and still cannot be turned on normally, there may be a problem with the system.
May be due to the battery is out of power, resulting in failure to turn on. If this is the case that we can not turn on, please first connect the phone to the power supply, if you see a charging sign on the screen at this time, and the battery is very low, it is out of battery. Do not think that when connected to the power supply, in charge, you can turn on normally.
Apple mobile phone has been showing the reasons for not being able to charge the machine andThe solution is as follows: The battery is damaged. An iPhone battery that has been used for a long time, or damaged for other reasons, can cause the charge to be unsustainable, making the phone unable to turn on. The mainboard is shorted.
may be caused by abnormal data cable or charger. According to the query of Zhongguancun Online network, the reason why the Apple mobile phone can not open the machine has been showing the charging sign is: abnormal data line: there may be a fracture problem inside the data line that looks normal. You can borrow someone else's data cable for testing to confirm whether it can be successfully charged.
A large number of downloads of software is easy to cause conflicts between software and software, and it is easy to open the machine for this reason. Button combination to enter dfu mode Method 1: Hold down the home and power button for 10 seconds at the same time, if you see Apple is too slow, to start again, then release the power button, continue to hold home5 seconds, if you see the connection to iTunes, it is a failure, to start again.
The iPhone doesn't work hereIn this case, it may be that the phone is in a dead state, you can also try to hold down the power button at the same time, the power button HOME button, and wait a few seconds for the phone to generally restart automatically.
May be the mobile phone protection case is too thick, it is recommended to choose a thin mobile phone protection case or not use when using wireless charging. The phone case is too thick will affect the induction of the charging coil and the wireless charger in the phone, resulting in normal charging. Therefore, it is recommended to remove the protective case of the mobile phone before using the wireless charger to charge; The charging coil area in the mobile phone is small, and if the mobile phone is placed incorrectly when wireless charging is used, it will also lead to failure to be positiveAlways charge.
Sometimes a power outage will also occur, resulting in an automatic shutdown. No matter how you operate the machine, you can't turn it on. If the power is automatically turned off, a battery icon appears on the screen. In addition, the iPhone's battery needs to be charged to more than 5% to turn on properly. If the battery is extremely low, charge it before turning it on. If the above method does not work, it may be a hardware fault of the iPhone. It is recommended to send it to Apple's authorized after-sales store for repair and testing.
Follow these steps and try again after each step: Check the charging cable and USB adapter for damageBad signs, such as broken or bent pins. Do not use damaged parts. Use a wall outlet and check that the connection between the charging cable, USB wall adapter, and wall socket or AC power cord is strong, or try another outlet.
1, if the battery is less than 5%, the phone can not be turned on. Make sure you have enough charging time and wait at least 10 minutes before trying to turn it on. Charging port problem If it still cannot be turned on after charging for a long timeMachine, you can try to tap the switch. If none of these methods work, the problem may lie with the charging interface. Check whether the interface is blocked by foreign matter and clean it up so as not to affect the charging effect.
2, at this time, we can try to press the Home and power buttons of the main screen of the phone at the same time, until the screen is lit up and displayed. If the above operation method does not work, at this time we can also connect the phone to the power supply, and then press the power and Home button at the same time to see if you can restart.
3, first of all, please make sure that the charger and data cable used are originalAnd check whether the charger is working properly. If the charger does not work properly, you may need to replace it with a new charger. Second, check that the power outlet is normal, sometimes the power outlet does not meet the standard or damaged may lead to the failure to charge.
4, If the iPhone cannot be turned on normally, please connect the iPhone and the computer through the USB data cable and charge it for about 20 minutes, try to turn on or force on (the sleep wake key and the main screen key are held down for 10 seconds at the same time), if there is still no effect, please send the iPhone to the after-sales service network for testing. Use as much as possible when chargingUse the original charger of the iPhone to charge, and the computer may take longer to charge due to the insufficient charging voltage.
5, when the iPhone5 suddenly black screen, crash, can not open the machine, there is no reaction, at this time you can try to hold down the power and Home button at the same time, keep at more than 10 seconds. See if you can force a reboot. 2, if the forced restart is successful, then you can see an Apple logo on the screen. After the restart is successful, it can be used normally.
6, may be due to the battery has been completely used up, resulting in noCan turn on. Please first connect the phone to the power supply, then you can see the charging sign on the screen. At this time, although it starts to charge, it needs to be charged to 5% before it can be turned on normally. So let the phone charge for a while before trying to turn it on. If the phone has been charged for a long time and still cannot be turned on normally, there may be a problem with the system.
About how the Apple wireless fast charge can not be turned on and the iphone wireless charging after the introduction to the end of this, do not know you find the information you need? If you want to learn more about this, remember to follow this bookStand. < / p >