1, open the car wireless charger: usually find the car's accelerator, and then use the car key to ignition the car, and then the wireless charger will automatically open. Put the helmet on the phone: Put the phone on the wireless charger in the car, and then put the helmet on the phoneMake sure there is a tight contact between the helmet and the phone.
2, the use of wireless charging steps: the car wireless charger fixed in the appropriate position in the cab; Connect one end of the USB data cable of the wireless charger to the car cigarette port and the other end to the wireless charger; After fixing the position of the wireless charger, make sure that it is stable and will not slide, put the phone on and charge it. Wireless charging technology comes from radio energy transmission technology, which can be divided into two ways: low-power wireless charging and high-power wireless charging.
3, fixed wireless charger. Owners need to buy a suitable wireless charger equipment, and thenThe wireless charger is fixed on the vehicle, and the fixed position should be convenient for the owner to take it. Connect the cigarette lighter. One end of the USB data cable of the wireless charging device is connected to the wireless charger, and the other end is connected to the car cigarette lighter interface. Put it in your phone. Put your phone in a wireless charger and it will start charging.
4, usually choose a place near the driver's seat. Next, connect to the cigarette lighter and use the USB data cable to connect the wireless charger to the cigarette lighter interface of the car respectively. Make sure the charging pad is clean and place the phone face up in the charging area of the charging pad. If the green charging symbol is displayed, the phone has been properly placedInto... '> Why do you often fail to charge mobile phones such as Xiaomi using the original car wireless charging base?
1, the original car wireless charging base to consider suitable for a variety of brands of mobile phones, in the design size will be slightly larger, in order to be compatible with various sizes of mobile phones on it. The principle of the car wireless charging base is magnetic field charging, the closer to the middle area, the better the magnetic field strength, if in the edge position, the magnetic field is weak, and even can not activate the wireless charging function of the mobile phone, resulting in intermittent, or unable to charge.
2, the distance between the charger and the phone is too far. Millet milletThe line charger needs to fit with the phone to charge properly, and if the distance is too far, the light will keep flashing. The charger port is loose. The interface of the wireless charger must be correctly inserted into the power socket, and if the interface is loose, the light will always flash. There is a problem with the charger.
3, then you can first back up your important information and the required data and then restore factory Settings, and then try, if not, it may be poor contact or mobile phone is not suitable.
4, Hello! The charger specifications of different models may be different, like the current output of the charger is differentLike that. The standard charging current of the charger can ensure better charging efficiency, such as the small charging current of the charger will extend the charging time or charge no electricity, if it exceeds the maximum, it may break down the electronic components.
5, can be out of power, the protection state is blinking. When the millet wireless charger, millet wireless charger (universal fast charging version) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again. Just give it a second. It's not in the right place. I got itMetal foreign objects, automatic protection Settings.
Advantages: Convenience. With the wireless charging function of the car, just place the mobile phone in the designated position, you can start charging, without the use of data cable to connect the mobile phone and the car, it is very convenient to use. Good compatibility. Using a data cable to charge a mobile phone needs to choose a different data cable according to the mobile phone charging port, and wireless charging does not need to distinguish the charging port, which can be unlimited compatible. Cons: Slow charging.
Good compatibility. Use data cableTo charge the phone, but also according to the charging port of the phone to distinguish the data line, such as type-c and Apple data line, and wireless charging does not need to distinguish, can be unlimited compatible. Cons: Slow charging. Although wireless charging is convenient, the charging speed will be much slower than data charging, because wireless charging can only receive electricity through the electromagnetic field in the coil, so the charging speed is not fast enough.
Advantages: convenient. Just put the phone in the designated position of the car, you can wireless charging, no need to use the data cable to connect the phone and the car, it is very convenient to use. Good compatibility. Charge with data cableElectricity needs to choose the right cable according to the mobile phone charging port, such as type-c and Apple data cable, and wireless charging does not need to distinguish, can be unlimited compatible. Cons: Slow charging speed.
A feed base is an infrastructure used to power a wireless charging device. It is usually composed of a power supply and one or more chargers, which can provide continuous, stable and reliable power for wireless charging devices, so that the device can remain charged without being disabled. The feed base can be used for wireless chargingFor home and business scenarios, such as portable devices such as smartphones, as well as mobile devices in vehicles such as cars and airplanes.
At that time, it is believed that Great Wall Motor will take the "SUV expert" gene as the base, coupled with the "hematopoietic ability" of the forest ecosystem, and the new Hi4 of the intelligent four-wheel drive electric hybrid system in the A-class to C-class market segment, and can quickly "turn out" and become the leader of industry, technology and market change. [This article from easy car number author electric state, copyright belongs to the author, any form of reprint please contact the author.
Check whether to use the original charging bottomThe seat uses a non-built-in charging base. The actual charging power varies with different scenarios. The actual usage prevails.
Wireless charging base: refers to the charger that does not need to be connected to the terminal device that needs to be charged without the traditional charging power cord, using the latest wireless charging technology, through the use of the magnetic field generated between the coils, the magic transmission of electric energy, inductive coupling technology will become a bridge connecting the charging base station and equipment. [Usage] : Just put USBConnect the wire and plug it into the socket.
Wireless charging, also known as inductive charging or non-contact inductive charging, based on the principle of electromagnetic induction, it is not necessary to transmit electricity to the device like the traditional wired charger, but the device that needs to be charged can be charged by contacting the wireless charging base.
Abstract: Charging base is a flat base style charger, it and the charging line together to form a wireless charger, you can charge the mobile phone. The charging base is generally universal, as long as the mobile phone has a wireless charging module built in, and supports the Qi standard, it can be carried out with a wireless chargerCharge up. When using the charging base to charge, it also needs to be noted that the charging base has a certain induction distance, and the thickness of the phone case may not be able to charge.
Connect the standard charger and data cable of the mobile phone to the wireless charger, and then put the mobile phone directly (vertically) or horizontally in the center position of the wireless charger base, you can realize wireless charging, the indicator light will have a breathing effect, 5 seconds later, plug and play, convenient and quick.
A base, shaped a bit like a tray, put the phone on the top, without connecting a charging cable, you can charge the phone, but this requires phone support.
iFory wireless charging base is very good, the appearance is smooth and rounded, the production is fine, and people cannot put down. There is also no ambiguity in use, good charging effect, no heat, smooth charging. High cost performance.
iFory 2-in-1 wireless charging base has a very sensitive foreign body detection function, and the safety is guaranteed. In terms of the heating function of the water cup, iFory has designed a safety scheme for automatic power failure of the empty cup with manual switching, which ensures both active and passive safetyBarrier.
The introduction of the car wireless charging base is here, thank you for taking the time to read the content of the site, more about how to use the wireless charging chassis, car wireless charging base information don't forget to find oh in the site.