This article to talk about desktop wireless charging, and desktop wireless charging how to use the corresponding knowledge points, I hope to help you, don't forget to collect this site. < / p > < h2 > the article directory list: < / h2 > < ul > < li style = 'margin - bottom: 3 px; list-style: none'>1, I want to use a tablet (WIFI) or (USB wireless card) to connect my desktop computer to the Internet, what do you need...
1, the desktop computer through the USB wireless network adapter steps: Plug the USB wireless network adapter into the USB port. Download any driver installation software, such as driver life, install USB wireless card driver. You can see the network icon in the lower right corner of your computer screen. Click on it. Display the surrounding WIFI name, select your own wireless WIFI name and click Connect. Enter your WIFI password and click OK.
2. First, contact. (below picture) outside the roomThe telephone line, that is, the broadband line, is connected to the cat (note: The telephone line is a 2-core thin line). Connect the cat to the blue socket of the wireless router using an 8-core cable. Or connect the last 8-core network cable to the NIC socket on the rear of the host chassis. (Square socket) Turn on your computer, right click on "Online Neighbors" on your desktop, then click Properties, select Local Connection, then click Properties.
3, Wireless routing setup Wireless routing setup requires a little skill, but don't worry, usually requires a crossover cable. If the conditions are not allowed, the purchase can ask the merchant to help set. Just follow wirelessThe instructions of the network card, bind your ADSL account to the route, and it can dial automatically with no additional action. After installing the wireless card, the computer will automatically search for and connect to nearby wireless networks.
1, the use of USB wireless network card: this is an external device, through the USB interface and the computer to provide wireless network connection function for the computer. The user simply plugs the wireless card into the USB port of the computerWait for the system to automatically install the driver, you can find the wireless network icon in the taskbar, and search for nearby WiFi signals to connect. This method is simple and easy, suitable for various types of computers, and the price of wireless network cards is relatively close to the people.
2, first connect the two computers with a network cable, right-click the wireless icon in the lower right corner of the laptop desktop, and select "Open Network and Sharing Center". Then in the window that pops up, click to open the "Wireless Network Connection" option. Then click in the window that pops up to open the "Properties" setting option.
3. Use USB Wireless Card: Buy a USB wireless card and plug it into the USB port on your desktop computer. Then, according to the wireless card model and computer operating system requirements, install the appropriate driver. Once the installation is complete, locate and connect to an available WiFi network in your computer's network Settings. This method is simple and suitable for all types of desktop computers.
4, need to prepare a mobile phone that can connect to WIFI, a computer that can connect to USB. Connect the phone to WIFI, and prepare the data cable to connect the phone to the computer. Enter the mobile phone system Settings, USB set to charge onlyWireless network card (aka receiver). If you do not need to use a receiver, you need to use a network cable to connect the cat → wireless routing → desktop computer to the Internet. Desktop computers will not automatically receive wireless network signals, because the desktop is not equipped with wireless network cards. The LAN port of the wireless router is used by the desktop computer and must be connected with a network cable.
Wireless network connection requires equipment, generally there will be routers, servers, online behavior manager, aggregation switch, access switch, AP. If you want your desktop to receive Wi-Fi and use wifi, here's how: Buy a wireless receiver. In order toUSB wireless receiver for example, the receiver is plugged into the USB interface of the computer. In the driver installation page that is displayed, install the driver. Some wireless network adapter receivers need to be installed by inserting the CD-ROM.
If you want your desktop computer to receive wireless network signals, you must buy a USB wireless network card known as a receiver. If you do not need to use a receiver, you need to use a network cable to connect the cat → wireless routing → desktop computer can also be connected to the Internet. Desktop computers will not automatically receive wireless network signals, because desktop computers are not equipped with wireless network cards.
Using a desktop to connect to the wireless network requires a signal source and connectionIt comes with a CD installation driver (some wireless network cards support no-drive, plug it in directly).
Buy a wireless receiver (desktop computers generally do not have wireless cards by default, so they cannot receive wifi for Internet access); Take USB wireless receiver as an example, the receiver is plugged into the USB interface of the computer; On the driver installation page that pops up, install the driver (some wireless network card receivers need to insert the CD installation); After installing the driver, search for the wireless network, select your own wireless network name, enter the password, click Connect to use the wireless network.
The wireless router connected to the desktop computer is plugged into the LAN port, and the WAN port is connected to the cat. To connect a desktop computer to a wireless router, you must first set up the wireless router as follows: Suppose the IP address of the router is 19161, refer to the label or manual on the router box.
The computer network cable needs to be plugged into the LAN port of the router. Connect the optical fiber or network cable to the WAN port of the router, or connect the network cable to the li port of the modemne port: The lan port of the modem is connected to the wan port of the wireless route.) The computer network cable is connected to the computer through the LAN port of the router.
In simple terms, it is to use a network cable, one end of the computer RJ45 network adapter interface, the other end of the router into the LAN port. Note that the desktop computer connected to the router can only be inserted into the LAN port of the router (general routers provide multiple LAN ports), but not the WAN port (the router has only one WAN port, the color will be different from the LAN port), the following is the meaning of the common router interface diagram.
Plug in the LAN mouth on the router, any, the router's WAN port to connect to the cat or the upper-level network.
I do not know what the main wireless router is doing, if it is only used as a switch, without other functions, as long as it is plugged into any LAN port.
About the desktop wireless charging and desktop wireless charging how to use this is the end of the introduction, do not know you find the information you need? If you want to know more about this, remember to follow this site. < / p >