Today to share with you the knowledge of how to connect the wireless charging back clip power supply, which will also explain the wireless charging splint, if you happen to solve the problem you are now facing, don't forget to pay attention to the site, start now!
< ul>1, the advantages of the back clip charging treasure Back clip charging treasure can be directly buckled on the back of the phone during use, compared with otherThe charging treasure is more convenient to use, and it will not pull the phone because of the existence of the data cable during use, and this charging treasure can be placed behind the phone, so there is no need to worry about the problem that the charging treasure will be lost.
2, the back clip charging bank is a convenient way to charge, can be directly clipped on the back of the phone, no data cable, easy to carry and not easy to lose, improve the use experience. But its battery capacity is small, usually can only provide a single charge for the phone, suitable for emergency situations. In addition, because the back clip charging bank is close to the back of the phone, it affects the heat dissipation function of the phone, resulting in a rise in the temperature of the phone and possible shadowRing phone performance.
3. The use of the back clip charging bank increases the thickness of the mobile phone itself, so the heat dissipation of the mobile phone is slow, which slightly affects the service life of the mobile phone battery. If you encounter rain, or there is moisture and various liquids or moisture will corrode electronic components and wiring. It is not easy to dissipate heat, and high temperatures will shorten the life of electronic devices, damage batteries and age certain plastics.
1, it should be noted that the contact point of the charging cable needs to match the contact point at the bottom of the charging treasure, otherwise it can not be charged normally. In addition, some charging banks also support wireless charging. For this kind of charging bank, it can be charged by placing it in a charging dock that supports wireless charging. This charging method does not require the use of any cable, and only needs to contact the charging bank with the charging base to start charging.
2, when using the Sodyan shared charging bank, you can use the TYPE-C header gold that comes with the charging bankThe genus touches the outermost contact to start charging. One feature of the Sodian charging bank is that it has no traditional charging port. This design allows the user to place the device directly on the power bank and complete the charging process by pressing the "Charge" button. 3. There is a USB-C bidirectional fast charge interface at the bottom of the charging bank, which supports 12W output and 20W input and can be fully charged within 2 hours. The middle contact is used for communication and power transmission of the base, while the activation button on the right has an indicator light to determine the working status and may support multi-color power display.
4, it is relatively convenient, can solve the trouble of no mobile phone data line, can save a lot of trouble, is very popular with lazy friends. Wireless charging is used to search the charging bank, and the charging method is relatively simple. After touching the phone with the search power bank, an app with "tips" will automatically appear on the phone screen. After opening the software, select the charging type according to the device to be charged, and click "Wireless charging" after selecting.
5, the charging port of the shared charging treasure has four electric shocks, two are positive and negative electrodes, one is temperature protection, and the other is the battery type. Four contacts, two of which are positive andThe negative electrode. One of the remaining is a temperature protection contact, and the last remaining one is generally used to distinguish the battery type, so only two work when charging.
1, the back clip battery with wireless charging function, can be put on the wireless charging base charging; Mobile phone wireless charging to take off the back clip close to the base to charge. With a back clip charging treasure wireless output wired input, the small capacity of the back clip charging treasure is actually not as large capacity wireless charging treasure. You might as well plug in a power bankDirect charge fast.
2, directly support the wireless charging function of the back clip battery on the charger with wireless charging function can be charged. When using wireless charging, please ensure that the charger and the back clip battery support the corresponding wireless charging protocol, and maintain a certain distance and position relationship to ensure the smooth charging process. At the same time, it should also be noted that the speed of wireless charging may be relatively slow, which is suitable for emergency charging or emergency use.
3, as long as the mobile phone is installed with a wireless receiver, it can be charged without a data cable.
4. Support. iphone13miWith wireless charging, you can also choose a phone back clip that supports wireless charging. In addition, it is also necessary to ensure that there are no obstacles between the phone and the charger to ensure the effect of wireless charging.
First, we open the Settings option and click Battery. Step two, we click on wireless reverse charging. The third step, put the device that supports wireless charging on the back of the machine, you can wireless charging. The basic principle of wireless charging: electromagnetic induction of a certain frequency of alternating current in the primary coil generates a certain current in the secondary coil through electromagnetic induction, thereby transferring energy from the transmission end to the receiving end.
HuaweiThe steps of mate40 wireless charging use a data cable to connect the charging head and the charging base, and then plug the charging head into the power supply. Place the charging base on the table, with the phone's screen facing up in the center of the charging base. After the phone is placed on the charging base for a few seconds, there is a dripping sound, indicating the start of charging.
Charge the wireless charger by directly placing the phone screen facing up in the center of the charger or in the position suggested by the manufacturer.
Open Settings and click Battery. On the battery page, tap Wireless charging Settings. The function will always be on. Notes for wireless charging:Choose the right charger to pay attention to the use of brand certified chargers, otherwise the device will be charged into the unstable, too high, too low current, resulting in equipment damage. At present, there are many different brands and quality wireless chargers on the market, and you should choose the right charger according to your needs.
1, there may be a problem with the quality of the adapter, any goods will have defective products. So in this case, please change the new line with the merchant in time. It could be a portable power sourceUSB contact is not very good. The mobile power supply has not been plugged in many times, and the interface part will always have some wear, which requires a new USB charging cable. It is also possible that the voltage of the mobile power supply is too low.
2, the data cable is not plugged in, causing the back clip battery to detect the existence of the data cable, but it cannot be connected normally, so it cannot be charged. In this case, simply plug and unplug the data cable to solve the problem. There are problems with the data line, some cottage lines may appear this situation, try to replace a new data line to try. The back clip battery itself has problems, if the original data cable is replaced, there is still noMethod of charging, may need to contact the manufacturer for warranty.
3, one is that the data cable is not inserted, the back clip battery detects the cable, but the connection is not normal, so it can not be charged, this situation is generally reinserted the data cable, it can be solved. Data line problems, many cottage lines will appear this situation, change the line to try.
4, first, the cause of similar charging problems: battery damage. The system is faulty. Charger cause or poor contact. Second, the solution: change another charger, or data cable to try, or clean the charging port. Start the system and enter the recover modeSelect advancsd advanced mode, select wipeBattery, and clear battery traces. Restore factory Settings to check whether the system is faulty. If the battery is damaged, it can only be sent for repair and replacement.
5, check whether the charging treasure output voltage is 5V, the output current is enough, if the voltage is too low, or insufficient current, it will not be charged.
6, check whether the charging treasure has electricity, if the charging treasure has no electricity, it can not be charged. Check whether the charging bank connected to other mobile phones can charge, if not, that is the charging bank is broken.
1, wireless charging need to buy their own wireless charger. Mobile phone open fast wireless charging mode, open method: setting - battery - fast wireless charging - sliding switch. This menu appears in the phone the first time it is placed on the wireless charger to charge. The center of the back of the phone is placed in the middle of the wireless charger to charge it.
2. Usage: Use the original Samsung charger to connect the wireless charging base. (If you use a non-original charger connected to the wireless charging base, the battery may not be availableNormal charging method.) Place the device in the center of the wireless charging base. The orientation of the device does not affect the charging. However, ensure that the device is placed in the center of the wireless charging base. After charging, remove the device from the wireless charging base.
3, mobile phone using wireless charging, you need to buy wireless charging base and wireless charging back shell can be used. Usage: Connect the charger to the wireless charging base, then install the wireless battery back shell on the phone, and finally place the phone on the wireless charging base normally.
4, mobile phone using wireless charging, you need to buy wireless charging base orThe rear case can be used for wireless charging. Specific usage: Connect the charger to the wireless charging base, and then place the mobile phone or a mobile phone with a wireless charging rear case on the wireless charging base. Note: If the phone case is too thick or not the original charging case, it may affect the charging effect, it is recommended to take off the case and try charging.
About how to connect the wireless charging back clip power supply and wireless charging splint this is the end of the introduction, do not know you find the information you need? If you want to know more about this, remember to follow this site. < / p >