Today to share the knowledge of wireless charging treasure can be charged with cable, which will also explain the wireless charging treasure can only charge mobile phones with wireless functions, if you happen to solve the problem you are now facing, don't forget to pay attention to the site, start now!
< ul>But the input and output line, it can be used in reverse, when charging the phone, the charging end is plugged into the phone, and when charging the charging bank, the charging end is plugged into the charging bankAnd then change the USB interface from the charging bank to the charger on it. However, it is also possible to connect both the USB interface and the type C interface to the charging bank, in theory it will short-circuit, but in practice it will not.
Under normal circumstances, the charging bank can be charged with the data cable of the mobile phone. Charging treasure generally has USB and mini USB output interface, these two interfaces basically meet the needs of most users. In addition, the power bank also comes with 4 to 5 conversion plugs. As for the charging port, it is not necessarily the same as the mobile phone, and the original cable of the charging treasure should be used.
oneLike a power bank, there is no problem using a universal usb charger. However, the output current of the universal usb charger (5V) is up to the standard, it is necessary to figure out that the current is too small will affect the charging speed. The battery power of the power bank will not be affected. If it is a fast charge input, it is necessary to use the voltage and current specifications that meet the fast charge input, and some must be decoded to use. Therefore, fast charge the input of the charging bank, it is best to use the original charger suggested by the manufacturer.
1. First,Let's take a look at the specifications of Xiaomi wireless charging treasure, which is 149 mm long, 76 mm wide, and 14mm thick. There is a USB port for mobile phone charging and a charging port for a power bank for mobile phone charging. The second step, we need to fully charge the charging bank, only need to use the USB cable to charge, charging will show the specific computer, after full charge can be used normally.
2, [a] Wired connection If your millet box itself contains an Ethernet interface, then plug in the network cable, you will successfully network, no other operations. If your Xiaomi box itself doesn't have etherNetwork interface and you want to use network cable connection. Then you need a "USB external 100 MEgabit network card", plug one end of the USB external 100 megabit network card into the millet box, and insert the other end of the network cable, the network is successful. Pros: Internet speeds are faster than wireless connections.
3, check the power: pick up the power supply, find the switch on it, and then press it with your thumb. At this time, the light beside the power button will blink, four lights will blink for full power, three lights will blink for 90% power, two lights will blink for 50% power, and one light will blink for 20% state, usually a light blink needs to moveThe power supply is charged.
1, the charging bank is not compatible with the mobile phone, and the mobile phone is insufficient. The charger bank is not compatible with the phone: Please check if the charger bank supports the wireless charging protocol of the Apple 15 phone. If it is not compatible, please replace it with a compatible charger. Low battery: Check whether your phone is fully charged. If your phone battery is below 20%, please charge your phone first.
2, is the phone as long as it supports wireless charging, all wireless chargingThis station. < / p >