Today to share the knowledge of the wireless charging bin does not charge into the electricity, which will also explain the principle of wireless charging of the charging bin, if you happen to solve the problem you are now facing, don't forget to pay attention to the site, start now!
< ul>You can refer to the following: vivo/iQOO Bluetooth headset or charging case is not charged, please check whether the charging case is charged (whether the indicator light is on), and the bottom of the headset is chargedWhether the electrical contact is dirty, if there is dirt, please clean it with dry cloth or dry paper towel; If the vivo/iQOO wireless headset can not be charged, please plug and unplug several times when charging, or replace another charging head and charging cable to see whether it can be charged.
Failure to charge the headset may be caused by damage to the charging compartment. Solution: The user needs to check whether the Bluetooth headset charger is damaged, and if it is found damaged, you can change the charging bin to charge the Bluetooth headset to try. Bluetooth headset charging should try to use the original charging compartment, so as to better protect the Bluetooth headset battery, power is also easierImport the battery inside the headset.
Improper operation Some users find that the charging bin cannot be charged in the process of using the Bluetooth headset. After investigation, it was found that because of their improper operation, they always put back and then take out another headset. The real design is that when both headphones are removed and then put back in either headset, the charging will be triggered. So, if you have a similar problem, take both headphones out first, and then put the one that needs to be charged in.
The reasons why the charging bin of the headset is not charged are as follows: It may be caused by the damage of the charging bin of the Bluetooth headset. This case can be checked for blueTooth headset charger is not damaged, if found damaged can change the charging bin to try to charge the Bluetooth headset. Bluetooth headset charging should try to use the original charging bin, so as to better protect the battery of the Bluetooth headset, and power is easier to import into the battery inside the headset.
If the headset is not charged, check the charging port, clean up dust, and check the USB port. Check whether the charging interface is clean and free of dust. Use a toothpick or clip to clean the dust inside the headphone compartment. Check whether the USB port has stains and clean the stains. If the preceding methods do not solve the problem, contact the headset providerThe manufacturer carries out maintenance. To charge your headphones, place them in the charging case and close the cover.
1. If the vivo/iQOO Bluetooth headset or charging case is not charged, please check whether the charging case has electricity (whether the indicator light can be lit), and whether the charging contact at the bottom of the headset is dirty. If there is dirt, please clean it with dry cloth or dry paper towel; If the vivo/iQOO wireless headset can not be charged, please plug and unplug several times when chargingOr replace another charging head and charging cable to see if it can be charged.
2, the headset can not be charged may be caused by the charging bin damage. Solution: The user needs to check whether the Bluetooth headset charger is damaged, and if it is found damaged, you can change the charging bin to charge the Bluetooth headset to try. Bluetooth headset charging should try to use the original charging bin, so as to better protect the battery of the Bluetooth headset, and power is easier to import into the battery inside the headset.
3. There are two main cases in which the charging bin of the Bluetooth headset is not charged: the first is the Bluetooth headsetInternal failure, such as battery or circuit damage, charging interface short circuit, such as the need to send the headset for repair. The second is that the charger or data cable has a problem, resulting in charging can not continue, so you need to replace the matching charger or data cable to recharge. Bluetooth headset use tips Choose the right charger.
4, the reason why the Bluetooth headset can not be charged in the charging bin is: the situation caused by the poor contact of the charging port of the charging bin (or headset). The solution is: if the charging bin (or headset) charging port is in poor contact, you need to contact the seller of the Bluetooth headset in timeEarphone charging bin cannot be charged '> Bluetooth earphone charging bin cannot be charged
The reason why the charging bin is fully charged does not charge the headset: the Bluetooth headset battery is exhausted, and it is excessively used, resulting in the battery being self-protected when charging. The earphones are not in place. You are advised to adjust the position and reinstall it. The charging port of the charging bin (or headset) is in poor contact. If the charging bin (or headset) charging port is in poor contact, it is necessary to contact the seller of the Bluetooth headset in time. Some power banks don't work with Bluetooth headsets.
If the headset is not charged, check the charging port, clean up dust, and check the USB port. checkCheck whether the charging interface is clean and has no dust. Use a toothpick or clip to clean the dust inside the headphone compartment. Check whether the USB port has stains and clean the stains. If the fault persists, contact the earphone manufacturer for repair. To charge your headphones, place them in the charging case and close the cover.
Please observe whether the charging contact of the earphone and the charging cartridge or probe of the charging case are stained with oil, sweat or dirt. If yes, try to clean it with a dust-free cloth or cotton swab. Tip: The charging contact is the only channel for communication between the charging case and the headset, such as charging due to dirt and other reasonsPoor contact will lead to the earphone into the box does not charge, close the cover earphone constantly connected and other adverse phenomena.
The contact of the Bluetooth headset or the thimble of the charging bay is broken or in poor contact. There is no electricity inside can not save electricity, this situation is relatively rare, generally look at the charging cabin electricity indicator light can know. The power control chip of the Bluetooth headset is broken. At this time, the Bluetooth headset is not available and cannot be charged.
Failure to charge the headset may be caused by damage to the charging compartment. Solution: The user needs to check whether the Bluetooth headset charger is damaged, if it is found to be damagedChange the charging bay to charge the Bluetooth headset to try. Bluetooth headset charging should try to use the original charging bin, so as to better protect the battery of the Bluetooth headset, and power is easier to import into the battery inside the headset.
The charging bin is not charged, and the repair tips are: replace the data cable, reset the charging box, after-sales maintenance, etc. Replace the data cable Try to replace the data cable, take out the headset or open the charging case cover to charge. Press and hold the Settings button on the back of the charging case until you see the status light flashing amber a few times, then keep blinking white.
The wireless charging compartment cannot be filledThe introduction of electricity talk here, thank you for taking the time to read the content of the site, more about the charging bin wireless charging principle, wireless charging bin does not charge into the information do not forget to find in the site oh.