Today to share the knowledge of wireless charging shell screen printing, which will also explain the film on the wireless charger to tear off, if you happen to solve the problem you are now facing, don't forget to pay attention to the site, start now!
< ul>1,Detailed steps for disassembling the MG 6 wireless charging board: First, we need to prepare a screwdriver, align the fixing screws at the four corners of the panel, loosen and remove them one by one, so as to facilitate the next step. Next, carefully lift the shielding cover on the front of the wireless charger to ensure smooth operation to prevent damage.
2, first, open the central armrest cover of the wireless charging board of Lynk & Co 05. Second, hold the wireless charging board with your hand and lift it upward from an Angle until it is removed from the upper button of the storage box. Finally, pull out the plug on the wireless charging board connector to complete the disassembly of the wireless charging boardYes.
3, push to let go, automatic rebound, if it can not be opened again, it should be the BMW wireless charging board rebound failure, to the 4s shop with a computer overhaul can be. Pull it straight away. There are three clips in the back. Just take them off separately.
4. Open the passenger compartment and separate the knobs on the left and right sides. Remove the damper and support pin from the glove box. Remove the glove box, use a screwdriver or removal tool to remove the side cover of the instrument panel, and use a screwdriver to remove the lower cover of the instrument panel. Unscrew and remove instrument panel chrome strip Unscrew and remove instrument panel side trim
1, green magnetic wireless charging mobile power disassemble the body shell, the edge of the buckle package. The PCB board is fixed with screws, the wireless charging coil is fixed on the battery core, and is covered with foam protection. A thermistor is fixed on one side for temperature monitoring. Take out the PCB board and electric core, the body shell is affixed with protective foam, the corresponding circuit board and electric core junction is provided with an isolation board.
2, Green Link MFi certified 10000mAh two-way fast charge mobile power supply This mobile power supply stands out with its exquisite design. It is made of PC flame retardant material, the shell line is rounded, laser engravingThe texture adds a touch of technology, and UGREEN's brand Logo stands proudly. There are four LED power indicators on the front, which are clear and intuitive, and the power button on the side is convenient to operate. The Lightning output line is cleverly designed and stored in the internal cable slot, which is practical and neat.
3, the power absorption treasure is a magnetic charging treasure and magnetic charger, such as green link's magnetic charging treasure is good. Green Link Three-in-one MagSafe magnetic wireless charging Bank is a three-in-one MagSafe magnetic wireless charging bank, using Apple's ATL battery, providing a strong magnetic design.Of course, the wireless cable dual mode fast charging design, plus can be transformed into a mobile phone stand, used to charge while chasing the drama. Wireless charging provides 10W, 5W, 5W charging.
4, Green link magnetic wireless charging bank 20W fast charge for you to seek more compatibility, Green Link this charging bank to meet the needs of the people. (A new choice for domestic brands, designed for domestic mobile phone brands...) This charging treasure sets magnetic mobile power and wireless charging in one, with discharge and charge, strong compatibility, can provide charging services for 99% of mobile phones, whether it is Apple, Huawei, Xiaomi or Samsung, can easily cope with.
5, Momis magnetic wireless charging mobile power disassemble the back of the fuselage leather bottom cover torn off, the shell edge with a number of screws package fixed, very firm. Remove the screws to open the case. The fuselage groove is embedded with a plastic frame, and the corresponding USB-C base is provided with a protruding fixed support plate, and the corresponding LED light is provided with an isolation slot to prevent crosstalk. The battery and PCB board are fixed on the back plastic plate.
6, Green Link this charging bank pays attention to the seamless fit with the iPhone. The use of MiniCell battery cell, the same material system as the iPhone battery, guaranteedSecurity and persistence. Built-in 9 powerful magnetic cores, accurately match the iPhone 12-14 series, to achieve a convenient experience. Its appearance design is fashionable, using sprayed PU feel paint, amiens electroplated frame, lightweight and portable, only 2/3 of the volume of iPhone 14, more comfortable to use.
1, ①, about MDY-08-E aboveThe DC output of the charger for the V model is 5V/2A. ②, about the above MDY-11-EM charger DC output is: 5V / 3A, 9V / 23A, 12V / 67A, 10V / 25A. 3, to the above two charger models are different, the voltage, current and power of the two chargers are different.
2, to the MDY-08-EV and MDY-11-EM, are representative of the charger model, for example, MDY-08-EV original charger DC output: 5V/2A. And that MDY-11-EM charger DCOutput: 5V/3A, 9V/23A, 12V/67A, 10V/25A. Therefore, these two different models of chargers, the parameters are also different.
3, MDY-08-EV and MDY-11-EM are two different charger models. For example, the original charger of the MDY-08-EV has a DC output of 5V/2A, while the DC output of the MDY-11-EM charger includes several parameters such as 5V/3A, 9V/23A, 12V/67A and 10V/25A. Therefore, the two models of chargers are different in terms of parametersYes. The above information is for reference only.
About the wireless charging shell screen printing and the film on the wireless charger to tear off this is the end of the introduction, do not know you find the information you need? If you want to know more about this, remember to follow this site. < / p >