Then check whether the keyboard Caps key light is on, if there is no power, you can also turn off the tablet Bluetooth and then turn it on again. Finally, the tablet and the keyboard can be adsorbed again.
Bluetooth no power, charging can be used normally. The steps are as follows: Step 1: Connect the USB-B end of the original USB to the keyboard. The second step: Connect the USB-A end to the power adapter or USB port of the computer. Step 3: The "charge" red indicator light will light up when charging, and the "charge" red indicator light will automatically turn off when the power is full.
First, attach the Huawei matepad plate to the groove and charge it for about 5 minutes. Second, check whether the keyboard Caps key light is on. If there is no power, you can turn off the tablet Bluetooth and turn it on again. Finally, the tablet and the keyboard can be adsorbed again. Try turning Bluetooth off and on again for tablet, tablet and keyboardRe-adsorption. Please restart the tablet and try again.
bow keyboard no power Check whether the Bluetooth keyboard is on, whether the switch is on. Whether the battery is charged. The Bluetooth keyboard is a device that needs to be charged separately, and if the Bluetooth keyboard is not powered, it cannot be used. Open the Bluetooth on the computer, re-pair the mode, if the search Bluetooth keyboard device, re-enter the pairing password can be connected normally.
1, the problem of charging line, you can change a charging line to try - next. You can clean the dust out of the charging jack. Hardware problem, keyboard charging jack is broken, then have to repair, or replace. G913 Wireless RGB Mechanical Keyboard - It uses Kaihua's GL low shaft, LIGHTSPEED technology, RGB backlight, and a number of convenient features preset on the body to let us see.
2, g913 common problem is its wireless RGB mechanical game keyboard quality is poor, there is a common problem of charging. The g913 mouse has a driver logic mismatch, which affects the player's experienceClick Update Driver button to update.
2, if the computer keyboard part of the keys do not respond, you can try the following solutions to check the connection Check the keyboard and the computer connection is normal. If you have a USB keyboard, try plugging it into another port, or try again with a different USB cable. Sometimes dust, hair and other substances on the keyboard can cause the keys to malfunction. You can use a cleaning solution or compressed air to clean up.
3, if it is the wireless USB interface of the keyboard and mouse set, check that the small transmitter end of the USB port is plugged into the electricityNo on the brain, and then check that the keyboard and mouse are equipped with batteries or pull out the protective tape on the battery. Replace the computer test or not, the keyboard and mouse to other computers to test, if it still does not work, it indicates that the quality of the keyboard and mouse itself is wrong, if it is OK. Note The mainboard is faulty.
4, if the components inside the keyboard fail, you need to contact the after-sales personnel to solve it. Has the keyboard ever encountered "close contact" with water? If water gets in, it could be a serious problem. The key does not respond, the reaction is sometimes no, these may be caused by water circuit problems.Plug it in Remember to plug the keyboard in after turning it off and before turning it on.
5, wireless keyboard no response Wireless keyboard no response We can first think of is that the battery is out of power, at this time we only need to put the battery in the keyboard, replace the new battery to try it. If changing the battery still doesn't solve the problem, then we can restart the computer, and then plug the USB receiver out of the computer and plug it into another USB port.
How to do about wireless keyboard charging is broken and the introduction of wireless keyboard charger is over, do not know where you lookDo you have the information you need? If you want to know more about this, remember to follow this site. < / p >