Today to share with you the knowledge that the wireless scanning gun is not charged, which will also explain the wireless scanning gun did not respond, if you can happen to solve the problem you are now facing, don't forget to pay attention to this site, start now!
< ul>Wireless scanning gun generally no light no sound can not read the code, there are two cases, 1: no power, you can use the cable to connect the computer to charge, charge toThe light changed or went off. 2: If there is no electricity, it may be that the battery inside is loose or the parts are damaged, at this time, you need to return to the factory warranty.
Data transmission problems may cause the scanning gun to fail to work properly. Check the data cable for damage, and if it is a wireless scanner, make sure it is properly paired with the base. The scanning head of the barcode scanner may be faulty. Try tapping or shaking the scanner head to see if you can restore its function. Problems with the quality of the scanning gun may be one reason.
The possible cause of the scanning gun failure is a power supply problemFor example, the scanning gun is not correctly connected to the power supply or the data cable interface is loose. Check the wire of the scanner gun, make sure the computer is powering, and reconnect the data cable to the scanner. Bar code irregularities may also cause the scanner to fail to recognize, such as the lack of necessary white space in the bar code, insufficient contrast between the bar code and the white space, or the incorrect ratio of the width and narrowness of the bar code and the white space.
Problem 2: The wireless scanning gun is not normal scanning analysis cause: the scanning gun may not be energized; The cable used does not match the scanning gun; The cable connector is loose. Solution: Check the scanning gun power supply, reconnect; Use the original factoryEquipped cable or cable of the scanning gun model; Disconnect the interface and reconnect it.
Lack of battery power: The black screen of the scanner is bright as soon as it is charged because of the lack of battery power, such as the battery power is too low, it will lead to a black screen after the boot, make sure that the battery of the scanner has been fully charged or inserted into the charger. Hardware fault: The hardware of the scanner is faulty, for example, the screen cable is loose or the screen itself is damaged, you can try to reinsert the screen cable, or contact after-sales serviceRepair.
Reason explanation: The reason why the black screen of the wireless scanning gun is lit when it is thrown hard may be because there is a problem with the power supply or connection of the wireless scanning gun. When the force is thrown, it may make the power supply or the connection part of the brief contact, resulting in the black screen problem to be solved. Expanded content: The wireless scanning gun needs power supply and connection with the terminal equipment in the work.
There is poor contact inside the charging data cable. Portable charger usually refers to a device that converts alternating current to low-voltage direct current, portable charging gun shows a black screen because there is poor contact inside the charging data line,This, it is best to send it to the supplier for repair.
The scanning gun cannot be charged for the following reasons: The cable may be broken. Or maybe the battery died and couldn't be charged. Or maybe the base is broken and won't fill. The other is that the mainframe is broken and can't be charged. So it's best to send it to the supplier to have it repaired.
Possible cause: The scanning gun is powered off, the scanning gun is not powered on, or the data cable interface is loose, resulting in poor contact. Solution: Check the scanning gun wire, ensure that the computer power supply is normal, and the data line is re-connected to the scanner. Problem description: Scanner scan, buzz normal, no data transmission.Possible cause: The scanning gun is set incorrectly; Cable bad solution: refer to the manual to ensure that the corresponding data cable is correctly set.
1, mobile phone version I know that the scanning gun is charged, if it is fully charged, the total power is not turned off, and the store is not in the store for 12 hours, okay? Let me shareWechat scan Sina Weibo QQ space report browse 2 times can select 1 or more of the following keywords, search for relevant information. You can also search the whole question directly by clicking "Search Data".
2, the red light. When the scanning gun is off, pay attention not to press the scanning button at this time, access the cable or put on the base (the base should be connected to the computer through the cable), at this time observe the top, you should find that the red light is steady on, indicating that it is charging at this time, about 4 hours can be full, when fully charged, the red light is off (at this time the scanning gun is still in the shutdown state).
3, barcode scanning gunIf there is no infrared, it means that you have not properly connected the wire of your scanning gun, so it will cause no infrared.
4, may be the scanning gun power failure, scanning gun is not powered on or the data line interface has been loosened, poor contact. Check the cable of the scanning gun to ensure that the computer power supply is normal, and the data cable is re-connected to the scanner.
5, it may be that the charging cable is not connected well, or it may be the scanning gun or the charging cable is broken; If it is the former unplug and re-plug to ensure that the connection is good, if it is the latter to replace a charging line first, or not charged, it is the scan gun is brokenTo be repaired. As a high-tech product closely combined with optical, mechanical, electronic and software applications, scanning gun is the third generation of major computer input equipment after keyboard and mouse.
6, the scanning gun in the mall in the process of scanning wechat pay, wechat balance is insufficient, can not deduct the fee successfully, there will be a reminder of failure to deduct the fee normally. In this case, the store will ask for a new payment.
1, the wireless code gun has 3 to 5 hours to charge. Wireless scanning gun, also known as cordlessThe scanning gun. Generally through Bluetooth, wif and other data transmission, you can not be limited by the length of the data cable transmission data, more convenient to use. The main wiring of the wireless scanning gun completes the purpose of scanning the barcode and transmitting it to the computer.
2, 10 hours range. SymbolDS6878: About 10 hours of battery life. HoneywellXenon1902: About 14 hours of battery life. ZebraDS3678: About 24 hours of battery life. MotorolaLI4278: About 72 hours of battery life.
3, yes. The wireless scanning code gun is equipped with a charging line, which can be charged or connected to the scanning code gun so that the wireless scanning code gun becomes a wired scanning code gun to use, so it needs to be charged. As a high-tech product closely combined with optical, mechanical, electronic and software applications, scanning gun is the third generation of major computer input equipment after keyboard and mouse.
4, cashier scan code gun infrared damage to the eyes I come to answer share wechat scan network busy please try again later Sina Weibo QQ space report Browse 275 times can select 1 or more belowKeywords, search related information. You can also search the whole question directly by clicking "Search Data".
5, the general 400-500 with storage function. If it's expensive, it's thousands. The difference is 100-200, and it is estimated that it can only take about half a year.
6, if it is a Bluetooth connection, it may be a long time did not use the Bluetooth connection disconnected, then you need to reconnect that can be used. Does the wireless scanning gun need to be charged, how to charge the wireless scanning gun is equipped with a charging line, which can be charged and can also be connected to the scanning code gun to make the wireless scanning code gun become availableLine sweep code gun to use.
First, pick up the scanning gun, loosen the screws on the tail of the scanning gun, you can remove the back cover, you will see the charging battery of the scanning gun. Secondly, take out the rechargeable battery of the scanning gun, and then disconnect the boundary of the battery, pay attention to carefully unplug the wire street, do not break the needle inside, and place for about 10 minutes.
Hello, the scanning gun cannot be charged for the following reasons: The cable may be disconnected. The battery may be damaged and cannot be charged. baseIt may also be damaged and cannot be filled. Another reason is that the main engine has been damaged and cannot be charged. Therefore, it is best to send it to the supplier for repair.
The scan gun can not open the machine for two reasons, first, the scanning gun battery has no electricity, after charging to see if it can be turned on. Second, whether the connection line of the scanning gun is disconnected, if the connection line is disconnected or poorly contacted, it will also lead to this situation. If you rule both out, unfortunately, the scanner's broken. Fix it. It could be the motherboard or it could be a key location.
Hardware failure, contact your dealer for repair. The scanning gun reads a stripAfter the code, the scanner gun dies. Due to the protection function of the scanner, if the data transmission of the barcode read is incorrect, it will automatically enter the protection state, thereby preventing data loss. If the data that has not been successfully transmitted is read, the scanner can be used again. If this occurs, check the connection and protocol carefully.
About the wireless scanning code gun charge is not charged and the wireless scanning code gun does not respond to this is the end of the introduction, do not know you find the information you need? If you want to know more about this, remember to follow this site. < / p >