Today to share with you the wireless rope charging how to power on the knowledge, which will also explain the wireless rope charging how to power on the video, if you happen to solve the problem you are now facing, don't forget to pay attention to the site, now start!
< ul>1. The battery is damaged. The system is faulty. Charger cause or poor contact. Solution: Try another charger, or data cable, or clean the charging port. Boot into the recover mode, select advancsd advanced mode, select wipeBattery, and clear battery traces. Restore factory Settings to check whether the system is faulty. If the battery is damaged, it can only be sent for repair and replacement.
2, Hengkang Jiye jump rope charging display off, indicating that your current charging mode is off. According to the query of relevant public information, the solution is as follows:Try another charger, or cable, or clean the charging port. Restore factory Settings to check whether the system is faulty. If the battery is damaged, it can only be sent for repair and replacement.
3, poor contact. It may be a problem with the charger or data cable, or the charging port is in poor contact. You can try to replace the charger or data cable, or clean the charging port to eliminate these factors. System failure or charger cause. It could also be a system failure or a charger that causes the jump rope to buzz while charging.
4, first plug the usb port of the charger into the charging hole of the handle.Then plug the other end of the charger into the power socket hole, and the red light flashes, indicating that the charging has begun. Finally, when the red light turns green, it no longer flashes, indicating that it is full, charging for 2 hours, and sustainable adaptation for 150 days, so there is no need to charge frequently.
1. The Huawei Jump rope is not charged. Connect the Huawei jump rope to the charger, hold down the side button for more than 30 seconds, release it, and reset the hardware. Check whether the adapter and charging interface are blocked by foreign objects and the internal connection cable is damaged. There is an end cap at the bottom of the rope end handle of the jump ropeOpen it with your hand. Charging can be done by plugging the configured charger into the socket inside the handle.
2, Huawei jump rope charging how to charge ah [question] Charging port in which [answer] a handle above [Answer] with the typeC head charging [Answer] Charging port has long been found. But it hasn't been able to charge properly. Now the battery is running out of power.
3. There is a cap at the bottom of the rope end handle, which can be opened by hand. Charging can be done by plugging the configured charger into the socket inside the handle. According to the instructions, it can be charged for 2 hours and can be used for 30 days, so it is not necessary to charge frequently. Restart the device: Find the shutdown button on the jump rope handle, press and hold the button until the jump rope indicator is off, and then press the power button again to restart the jump rope. Check the power: if the power of the jump rope handle is low, the device may stall or crash. Make sure the jump rope handle has enough power, if not, use a charger to charge it. Within a year can be replaced for free 75 skip rope T20L is composed of two handles and a steel wire rope, the handle part of ABS material, Alec paint and metal ring splice design style, generous and simple, comfortable grip, which is also intimate in the hand grip of the place to do the matte design, anti-slip and wear. Sweaty palms will not slip when held for a long time. Pie jump rope charging is generally charged for 5-2 hours, the longest not more than 4For an hour. Send the jump rope has been restarted solution: try to restore the jump rope device to factory Settings. Find the factory reset button on the jump rope handle and press and hold it until the jump rope indicator goes off and lights up again. This will erase all Settings and data from the device and restore it to its initial state. The situation is battery damage, system failure, charger reasons or poor contact and other reasons. Battery damage: Consider replacing it with a new battery. Department ofSystem failure: Attempts to recover or restart the system. Charger reasons or poor contact: Check whether the charger is working properly, or try to replace a charger. At the same time, check whether the connection between the jump rope and the charger is good. Question whether the main want to ask "electronic skipping drop ring does not turn on the maintenance method" maintenance method is as follows: Check the battery: first of all, you can check whether the battery is short of power or poor battery contact, if the battery is short of power or poor contact, it will lead to skipping can not turn on. In this case, you can replace the battery or reinstall the battery to ensure that the battery is in good contact. You can try to press countThe button on the device, if the digital display lights up and begins to display numbers, it means that the jump rope counter has electricity, if the digital display does not respond, it means that the jump rope counter has no electricity. Jumping rope is a kind of fitness exercise. It is a way to exercise the body through continuous jumping. Jumping rope can exercise the heart and lung function, improve endurance, enhance muscle strength, improve coordination and balance. About wireless jump rope charging how to go and wireless jump rope charging how to go to the end of the video introduction, do not know you find the information you need? If you want to know moreThis information, remember to collect attention to this site. < / p > Hengkang Jiye high school entrance examination special jump rope can not open the machine