Today to share the knowledge that the wireless audio charging table can not be charged, which will also explain the audio charging did not respond, if you happen to solve the problem you are now facing, don't forget to pay attention to the site, start now!
< ul>1, portable audio charging has been green, which is the built-in lithium battery or charge management line is broken, can not detect the charging current, so it will always show green.
2, check the use time of the audio, determine whether the power adapter is normal. The speaker always shows the green light when charging, check the use time of the speaker, the use time of the speaker has not changed, then the problem is not serious and does not need to be dealt with immediately. The speaker always shows the green light when charging to determine whether the power adapter is normal. If there is a problem with the power adapter, the green light will be displayed, so as not to charge.
3, you want to ask why the light is always green when Mi Gao audio charging? Charging is complete. When charging, the Migao audio will emit three drops, indicating that the power is less than half of the status light is red, and when the power is full, the status light is green. Miko Audio is a portable Bluetooth speaker, using dual voice coil stereo speakers, support Bluetooth wireless transmission.
4, the charger jump lamp mechanism, the current is the use of voltage and current dual control, when the battery voltage close to the charging jump lamp voltage, the charging current will continue to decrease, when the voltage is higher, the current is smaller and smaller, when the current is lowIt's not plugged in properly, the plug is disconnected from the socket, and even the battery is disconnected.
is generally poor contact or charger damage, change a charger to try.
Portable audio charging has been green, which is the built-in lithium battery or charge management line is broken, can not detect the charging current, so it will always show green.
There may be a problem with the output audio, check the signal source to see if it has a problem, if it is, then solve it in time, if you try the above methods or not, then you can clean up the speaker dust or check whether the eardrum of the speaker is split, both cases will lead to abnormal sound of the Bluetooth speaker, If it appears, clean it up promptly. The solution is as follows: the charger is broken, replace the charger.
The charging circuit is broken, if there are conditions to change a charging IC.
Common reasons for Bluetooth audio chargingAnd the solution is as follows: the charger is broken, replace the charger. Charging data line is bad, replace the data line is good. The battery cannot be charged and needs to be replaced. Speaker motherboard power management line fault, need to repair audio motherboard.
The rechargeable battery used by the Bluetooth speaker can not be charged for a long time, which is normal, especially the small Bluetooth speaker. In this case, replace the rechargeable battery. The original rechargeable battery capacity is relatively small, it is recommended to replace a rechargeable battery with a relatively large capacity, and the use time is long. Will not be replaced by the same type of rechargeable battery energy.
May be the charger and the cable is bad, re-change the charger and the cable to try to charge. probablyThe charging interface is bad and can not be charged or the poor contact leads to no charging reaction, only to change or weld it at the maintenance place.
may be a problem with the output audio, check the signal source to see if it has a problem, if it is, then solve it in time, if you try the above methods or not, then you can clean up the speaker dust or check whether the eardrum of the speaker is split, both cases will cause the Bluetooth speaker to appear abnormal sound, If it appears, clean it up promptly. The solution is as follows: the charger is broken, replace the charger.
bose toneSolution: Press and hold the power button, check whether the indicator light changes from red to yellow, and then restart. Check the charging cable for damage. Upgrade your device to the latest version. Bose is one of the largest loudspeaker manufacturers in the United States, founded in 1964 by Amar G.Bose and headquartered in Massachusetts, USA.
First, the reason for not charging is that the built-in battery of the audio has been scrapped for a long time, the charging current has been large, and the red light has been flashing, the charger has a serious fever, and it cannot be charged at all.
can be replaced with the same voltage and current chargerTry it. It's charging. It won't work. If the charger is changed, or so, consider the problem of the speaker charging circuit and battery, which needs to be sent back to the after-sales center for replacement. Returned bose for muse hub.
The battery can not be charged, after excluding the plug, charger and battery damage, it is necessary to check whether the battery is dormant, if the battery is placed for a long time, the lithium battery will self-discharge, reach the battery protection board voltage minimum threshold, the battery protection board will make the battery into a dormant state, the phenomenon of normal charger, is not charged.
1. Cause 3: Multimedia computer Bluetooth speaker battery is not charged there is a multimedia computer Bluetooth speaker battery failure, no matter how you go to charge, can not charge into, check the method is the same to the mobile phone or other interface the same device with the same charger and data line to power down, if they can be charged into the power, That may be a multimedia computer Bluetooth speaker battery problem.
2, the charger is broken so it can not be charged. Solution: Replace the chargeA surname The cable for charging the Bluetooth speaker is broken. Solution: Replace the data cable. The Bluetooth speaker battery is dead and can't be charged. Solution: The battery needs to be replaced. The power management circuit of the speaker mainboard is faulty. Solution: Need to repair Bluetooth speaker motherboard.
3, the audio is fully charged when the indicator light is blue, loss of power when red, sometimes charging a red light long, actually is the audio appeared crash. When there is a crash, the solution is very simple, find only the two keys on the top of the stereo, "off" and "" keys. Use two fingers to hold down the above two keys at the same time, note that at the same time. Hold the press position for a little longer, about 20 seconds or so.
4, according to the relevant information of Zhongguancun Online show: The small steel gun Bluetooth speaker is not charged, there are two ways to determine whether the circuit board is damaged: The charger or USB charging cable is damaged: it is recommended to change a charger or USB charging cable to try to see whether it can be charged normally. If it can be charged normally, it can be determined that the charger or USB charging cable is damaged, resulting in no charging.
5, Bluetooth audio charging into the common reasons and solutions are as follows: the charger is broken, replace the charger. chargedThe data line is broken, just replace the data line. The battery cannot be charged and needs to be replaced. Speaker motherboard power management line fault, need to repair audio motherboard.
6, if the Bluetooth speaker does not need to be charged for a long time, it may be caused by interface oxidation or poor contact. Any electronic product that is not used for a long time will have oxidation. After oxidation, it will lead to poor contact between the interface and some lines.
About the wireless audio charging table can not be charged and audio charging does not respond to the introduction to the end of this, do not know you find the information you need? If you stillWant to know more about this, remember to pay attention to this site. < / p >