1, may be out of power, the protection state is blinking. 20W millet wireless charger packaging or the past millet has always been simple white packaging, the front of the package in addition to the appearance of a wireless charge, there is no other introduction. There is almost no content in the package, only the name of the product on the side of the package: Millet wireless charger.
2, the reason why millet mobile phone wireless charging does not charge may be that the battery has entered a hibernation state. That's mostly because the user is running out of batteryCaused by the automatic shutdown. Wireless charging technology (English: Wirelesschargingtechnology; Wirelesschargetechnology is derived from radio energy transmission technology, which can be divided into two ways: low-power wireless charging and high-power wireless charging.
3, the distance between the charger and the phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. The interface of the Xiaomi wireless charger must be correctly inserted into the power socket, if the interface is loose,The lights will keep flashing. There is a problem with the charger.
4, can be out of power, the protection state is blinking. When the millet wireless charger, millet wireless charger (universal fast charging version) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again. The power will be off for a while, this is not placed in the right position, detected metal foreign objects, automatic protection Settings.
1, this should be the inside of the poor contact caused by poor contact, you need to repair this, if not more than a year can be free maintenance, you quickly download the millet mall, after downloading to find inside the customer, find inside the customer service for you to repair.
2, Mi 9pro wireless reverse charge open method is: pull down the notification bar to select wireless reverse charge, and then click in the pop-up prompt box to know, you canPlace the charged device in the center of the rear cover of the Mi 9 Pro for charging. The Mi 9 Pro 5G is the second 5G smartphone released by Xiaomi on September 24, 2019.
3, the open method of Mi 9pro wireless reverse charge is: pull down the notification bar and select "wireless reverse charge", and then click "know" in the pop-up prompt box, you can put the charged device in the center of the Mi 9 Pro back cover for charging. The screen size of the Mi 9 Pro 5G version is the same as that of the Mi 9, which is 39 inches; In terms of color matching, the Mi 9 Pro 5G has a dreamWhite, titanium silver black two colors.
4, Millet 9pro wireless charging how to use? Buy a wireless charger, then connect the charger to a power source. Then place the Mi 9 in the appropriate position of the wireless charger to start charging. Mi 9pro uses a universal charging combination, that is, it supports four charging forms of wired fast charge, wireless flash charge, wired OTG backcharge and wireless backcharge, which can be charged at any time, readily and arbitrarily. The wireless flash charge power can reach 30W.
5, the solution is as follows: First, use the original charging head to charge. Second, cleanlinessThe charging head jack and the interface of the charging head in the mobile phone. Adjust the insertion position to prevent bad contact. Third, go to the official application for maintenance, replace the charging interface.
Battery appears, damaged. It is recommended to replace the millet home.
This situation should indicate that your phone can not be charged, it may beA warning icon indicating that the charging port is damaged or abnormal and cannot be charged. It is recommended to go to a professional maintenance network or mobile phone after-sales service network, ask a professional to check whether to replace or repair.
This battery is marked with a cross, indicating that the cell phone battery has been damaged or the battery has reached the end of its life. In this case, the battery needs to be replaced, first buy a new battery from the Internet, and then insert the Cato pin through the jack to remove the cato. Then from the tail of the phone near the gap bit by bit, until the battery back cover is removed, and then unscrew the battery clamp screw, remove the clamp, and remove the battery stripWire, just peel off the battery tape.
1. The reasons for Mi 9 not being charged may include damage to the charger, poor contact between the charger interface and the mobile phone interface or poor contact with the socket, and not using the original Xiaomi charger. The way to solve the problem of millet charging is to check whether the charger is damaged, and if it is damaged, replace the charger. Check whether the two ports are properly inserted. If not, reinsert them.
2, first of all, the possible reason is that there is poor contact with the charging port. The solution is to use a card pin or paper clip, gently insert it after straightening and pick the charging port, in order to remove the dirt or foreign matter that may exist inside. This step helps to ensure that the charging cable correctly touches the charging port of the phone so that normal charging can resume. If the above methods do not work, there may be other problems, such as battery failure, damaged charging cables, or incompatible chargers.
3, millet 9 mobile phone can not charge what is the reason? The original charger is not used to charge the phone, or the charging port is not properly connected. It may also be the cause of voltage instability, please change the charging environment or change to the computer usb charging; It may also be that the charging environment is too cold, it is recommended to change to a warmer place to try. It is not the latest version of the system, it is recommended to upgrade to the latest version.
4, millet mobile phone does not charge into the power is the charging line or charger failure, mobile phone hardware failure, mobile phone battery aging, mobile phone software problems, the battery into the hibernation state. Charging cable or charger failure Frequent use of charging cable or charger will cause its aging, which may affect the charging effect of millet mobile phones. Make sure to use it before checkingRemember to collect attention to this site. < / p >