Today to share with you the knowledge of the newly bought wireless headset charging, which will also explain why the wireless Bluetooth headset just bought can not charge, if you happen to solve the problem you are now facing, don't forget to pay attention to the site, now start!
< ul>1, charging may be caused by the damage of the Bluetooth headset charger, this situation can be checked to confirm whether the Bluetooth headset charger is good, if found damaged can change the charger or usb charging cable, to try to charge the Bluetooth headset.
2. Whether the charging contact at the bottom of the earphone is dirty: If there is dirt, please clean it with a dry cloth or cotton swab. Check that the charging case is charged: Check that the headset is chargedCan the box indicator light be lit? If it shows orange, the battery is low, please charge it for a period of time and try it.
3, Bluetooth headset can not be charged, first of all to find the reason. Usually, the Bluetooth headset battery damage caused. Or the charger is damaged. Check whether the Bluetooth headset charger is intact, and try to use the original charger to charge the Bluetooth headset. Solution: Change the charger or USB charging cable, and try charging the Bluetooth headset. If the charger is good, consider that the Bluetooth headset battery is damaged.
4, may be the Bluetooth headset battery appearsDamage can be detected at a nearby maintenance point. It may be that the charger of the Bluetooth headset is damaged, you can replace a charger or data cable to charge, it is recommended to replace the original charger.
5, Bluetooth headset can not be charged, there are many possible reasons, including charging port failure, battery aging, charger problems and external environmental effects. First of all, charging port failure is one of the common reasons. Prolonged use or improper insertion may cause the charging port to wear or damage, which will affect the charging effect. For example, if the metal contact in the charging port is poor due to oxidation or dirt, it will hinder the currentSmooth transmission, so that the headset can not be charged normally.
1, the battery in the Bluetooth is dormant or has been damaged; You can first connect the Bluetooth headset with a special charger for half an hour to see if you can fill it. If you can't charge it, you can only get the nearby after-sales service to reactivate the Bluetooth headset battery and restore normal charging.
2, Method 1: Most headset manufacturers in the production of a unified method: at the same time hold down the "power switch."And" Volume "buttons do not let go for 15 seconds. Method 2: First turn on the earphone (do not need to enter the code state), and then charge the earphone for 5-10 seconds, most earphones are charged in the power state, the earphone will automatically turn off, and the machine will be forced to restore to the factory state.
3, the battery contact is poor or the protection board is damaged. According to public information query that: Cool dog x5 headset right ear can not be charged because the battery contact is poor, or the protection board is damaged, you can use a voltmeter to check it or give it to after-sales treatment.
4. The box is dead. The box needs to be charged, too. Fill it upElectricity.
You can take the machine, invoice and wait until the nearby maintenance outlet, test, repair or replace the new battery. Bluetooth headset can not be charged into the electricity can try to replace the charger. Not charging into the battery may be caused by damage to the charger of the Bluetooth headset, this situation can be checked to confirm whether the Bluetooth headset charger is good, if found damaged can change the charger or usb charging cable, to try to charge the Bluetooth headset.
Check the charging cable and charging port When you find that the Bluetooth headset cannot be charged, first check whether the charging cable and charging port are normal. Sometimes, fullWires may be damaged due to long-term use or improper storage, resulting in normal charging. At this time, you can replace a new charging cable and ensure that the charging interface is clean and dust-free to ensure smooth charging.
Check whether the Bluetooth headset charger is intact, and try to use the original charger to charge the Bluetooth headset. Solution: Change the charger or USB charging cable, and try charging the Bluetooth headset. If the charger is good, consider that the Bluetooth headset battery is damaged. You can take the machine and wait until the nearby maintenance outlet to detect, repair or replace the new battery.
1. Whether the charging contact at the bottom of the earphone is dirty: If there is dirt, please clean it with a dry cloth or cotton swab. Check whether the charging case is powered on: Check whether the headset charging case indicator light is on. If it shows orange, the battery is low, please charge it for a period of time and try it.
2, when it is found that the Bluetooth headset can not be charged, the first need to check the charging cable and charging interface is normal. Sometimes, the charging cable may be damaged due to long-term use or improper storage, resulting in failureCharge normally. At this time, you can replace a new charging cable and ensure that the charging interface is clean and dust-free to ensure smooth charging.
3, if charged for a long time or not charged into the electricity, you can change a charger to try to see if the charger is broken; If there is no problem with the charger, then it is likely that the battery is broken and needs to be repaired or replaced with a new Bluetooth headset.
When you find that the Bluetooth headset cannot be charged, you first need to check whether the charging cable and charging interface are normal. There areAt the same time, the charging cable may be damaged due to long-term use or improper storage, resulting in normal charging. At this time, you can replace a new charging cable and ensure that the charging interface is clean and dust-free to ensure smooth charging.
If the newly bought Bluetooth headset can not be charged, then it should be a battery failure, or a charger failure, directly return or exchange it. If it has not been used for a long time, it may be that the lithium battery of the Bluetooth headset is dormant.
You can refer to the following: vivo/iQOO Bluetooth headset or charging case can not be charged, please check the charging caseWhether there is electricity (whether the indicator light is on), and whether the charging contact at the bottom of the headset is dirty. If there is dirt, please clean it with dry cloth or dry paper towel; If the vivo/iQOO wireless headset can not be charged, please plug and unplug several times when charging, or replace another charging head and charging cable to see whether it can be charged.
Check the charging cable and adapter: First, make sure that the charging cable and adapter used are working properly. Try using other charging cables and adapters to confirm if the problem is related to the charging cable or adapter. Clean ports and jacks: Charging ports and jacks may come into contact due to dust or debrisBad. Use a clean, dry cotton swab to gently clean the charging port and jack of the Bluetooth headset to ensure that there are no foreign objects blocked.
1, when it is found that the Bluetooth headset can not be charged, the first need to check the charging cable and charging interface is normal. Sometimes, the charging cable may be damaged due to long-term use or improper storage, resulting in normal charging. At this time, you can replace a new charging cable and ensure that the charging interface is clean and dust-free to ensure smooth charging.
2, BluetoothIf the headset cannot be charged, you can try to replace the charger. Not charging into the battery may be caused by damage to the charger of the Bluetooth headset, this situation can be checked to confirm whether the Bluetooth headset charger is good, if found damaged can change the charger or usb charging cable, to try to charge the Bluetooth headset.
3. Whether the charging contact at the bottom of the headset is dirty: If there is dirt, please clean it with a dry cloth or cotton swab. Check whether the charging case is powered on: Check whether the headset charging case indicator light is on. If it shows orange, the battery is low, please charge it for a period of time and try it.
4The charger is broken or the socket is in poor contact. It may be that the use of the charger for a long time makes the charger socket loose and the poor contact results in the inability to charge the Bluetooth headset normally. I suggest you try a new charger. The charging port of the Bluetooth headset is loose, resulting in poor contact. Check the charging port of the Bluetooth headset, whether there is loose, poor contact, resulting in normal charging. The battery of the Bluetooth headset is damaged, so it cannot be charged.
5, if the newly bought Bluetooth headset can not be charged, then it should be a battery failure, or a charger failure, directly return or replace it. If it's a long timeIf it is not used, it may be that the lithium battery of the Bluetooth headset is dormant.
This is the end of the introduction of why the newly bought wireless headset can't be charged and why the wireless Bluetooth headset just bought can't be charged. Do you know if you can find the information you need? If you want to know more about this, remember to follow this site. < / p >