Today to share with you the star road Yao Guang wireless charging not on the knowledge, which will also explain the star road Yao Guang wireless charging not on the power, if you happen to solve the problem you are now facing, don't forget to pay attention to the site, now start!
< ul>Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
Please check that the back of the phone is centered in the center of the wireless charging board. Between the phone and the wireless charging padIf there are inclusions, it may not be able to charge properly. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally.
First, check that the connection between the charger and the device is stable and ensure that the device is properly placed on the charger. Second, check whether the device itself has a charging problem, you can try to use a wired charger to charge to eliminate the problem of a wireless charger. Finally, if the above methods are not effective, you may need to consider moreChange the charger or contact Xiaomi customer service for further support and solutions.
The distance between the charger and the mobile phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. The interface of the wireless charger must be correctly inserted into the power socket, and if the interface is loose, the light will always flash. There is a problem with the charger.
Try to replace other wireless charging base for charging,Locate the fault of the mobile phone or the wireless charger. A non-Huawei wireless charger may be incompatible with the mobile phone, resulting in abnormal wireless charging. You are advised to use a Huawei official wireless charger. If the preceding problems persist, you are advised to back up the phone data (third-party applications such as QQ and wechat need to be backed up separately), bring related accessories and purchase vouchers, and go to a nearby Huawei customer service center for testing.
Different brands of models due to the difference in coil position, may lead to low charging efficiency or can not be charged, please put the mobile phone wireless charging area correctly in the wireless charger induction area to try. Please do not use too thick orMagnetic insulation/metal case, these cases may affect the charging efficiency or can not be charged, or even overheating to cause the phone can not be charged or damaged.
Check the charger and power adapter: Make sure the wireless charger and power adapter you are using is compatible with the Mate 30. Sometimes, incompatible chargers may not work properly. It is recommended that you use original or certified chargers and adapters. Clean and inspect the device: Check your Mate 30 and wireless charger for any dust, dirt, or foreign objects. These substances may interfere with the normal operation of the wireless charging function.
When the mobile phone cannot use wireless reverse charging, please follow the following steps: Please check whether the wireless reverse charging switch is turned on. Set the battery and turn on the wireless reverse charging switch. Please confirm whether the battery of your charging phone is more than 20%. If the battery of the phone is less than 20%, please use the charger to charge the phone first, and then wireless reverse charging after the battery is higher than 20%.
The causes are as follows: In the notification bar, click the button to enable wireless reverse charging. The charged device needs to be placed in the correct position in the center of the rear cover. The device to be charged must be supportedStandard Qi wireless charging protocol (for example, AppleWatch is a non-Qi wireless charging device, which cannot be charged by wireless backcharging function). There should be no metal ornaments or foreign objects between the phone and the device being charged.
1, when the car charger can not charge the device, the possible reasons are mainly the following: Car cigarette lighter fuse damage: If the charger inserted into the car cigarette lighter can not work properly, first of all, you need to check whether the fuse of the cigarette lighter hole is completeYes. Damaged fuses can prevent chargers from charging devices such as mobile phones. At this point, you can try to replace the charger or replace another charging device for testing.
2, the charger and mobile phone compatibility problem: if the car charger is not fully compatible with your mobile phone, it may cause the charging current to be too small, or even unable to charge. In addition, the output current of some poor quality car chargers may be unstable, which will also affect the charging effect. Power outlet problem: Car chargers usually use the car cigarette lighter as a power outlet.
3. First of all, poor contact between the car charger and the charging device leads to chargingOne of the common reasons the device fails to charge. Since the vehicle is usually accompanied by shaking during driving, the charging interface may be shaken open, resulting in an inability to charge normally. The solution to this problem is simple, just reconnect. Secondly, the voltage instability of the car charger may also cause the charger to be unable to charge.
Because some mobile phone protective cover is too thick, or the material of the mobile phone protective cover may affect the identification function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protectionTry again after setting. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
Incorrect charging position Check whether the phone is facing the center of the wireless charging pad, if not, it may cause failure to charge. If there are obstacles between the charging pad and the phone, such as keys, coins, etc., it will affect the charging effect and they need to be removed. The phone case is too thick thick protective case may affect the charging effect, try to take down the phone case and then charge.
Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
Different brands of models due to the difference in coil position, may lead to low charging efficiency or can not be charged, please put the mobile phone wireless charging area correctly in the wireless charger induction areaDomain attempt. Please do not use too thick or magnetic insulation material/metal material case, these cases may affect the charging efficiency or can not be charged, or even overheating to cause the phone can not be charged or damaged.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally.