1, cause analysis (1) Battery damage (2) system failure (3) charger cause or poor contact. Solution: Change to another charger,Or try the cable, or clean the charging port. Boot into recover mode, select advancsd Advanced mode, and select wipe Battery to remove battery traces. Restore factory Settings to check whether the system is faulty. If the battery is damaged, it can only be sent for repair and replacement.
2. Loose battery socket If the battery socket in the machine is loose during transportation or use, open the rear cover with a screwdriver, remove the battery plug, and insert the battery plug back into the mainboard seat in the original direction. Charge it again. The battery is damaged. The battery is damaged. Please return this problem for repair.
3, charger problem: First check whether the charger is working properly. Whether the plug is intact, whether the connection is firm, etc. You can try to replace another charger for testing. Loose or damaged charging cable: Check whether the charging cable is loose or damaged, and ensure that the charging cable is tightly connected to the port of the watch. If the charging cable is damaged, replace it with a new one.
4, a phone watch that has not been used for a long time may not be charged due to excessive battery discharge. You can try the following methods to solve this problem: Check the charger and cable: First make sure that the charger and cable are not damaged and the plug is in good contact.The charging cable that comes with the watch, the damage and failure of the charging cable will also cause the inability to charge. Battery failure: The battery is damaged so that it cannot be charged, and it will be returned for repair. Watch software failure: The software failure can not charge, you can restart the watch, or restore the watch factory Settings, reinstall the latest software version.
Battery damage; System failure; Charger cause poor contact. Socket loose; The battery is damaged by overdischarge. Charging cable damage caused by wrong connection; Caused by hardware problems. Contact oxidation; The watch battery runs out; Watch water should be sent to the mobile phone watch professional maintenance and after-sales department.
Charging port is not tight. Check the charging interface, if it is not close, it will not be charged. The magnet problem. Check the magnet for problems. Contact oxidation. Scrape the contacts clean with a needle. The charger is damaged or in poor contact. Before you plug in the charging cable, make sure that the charging cable and the charging head are good, some charging heads and the watch USB base are not in good contact, and you should use the charging cable that comes with the watch.
The phone watch does not charge may be caused by the following reasons: Battery damage: The battery may wear out or malfunction after a period of use, resulting in difficult charging. You can try to replace the battery orSend for repair. System failure: The watch system may be faulty, resulting in abnormal charging. You can try putting the watch into recover mode, select advancsd Advanced mode, and then select wipe, battery to remove battery traces.
1. The battery socket is loose. If the battery socket in the machine is loose during transportation or use, open the rear cover with a screwdriver and remove the battery plugAfter that, insert it back into the mainboard seat in the original direction and insert it tightly into place. Charge it again. The battery is damaged. The battery is damaged. Please return this problem for repair.
2, the phone watch is not charged may be caused by the following reasons: Battery damage: The battery may suffer loss or failure after use for a period of time, resulting in charging difficulties. You can try to replace the battery or send it for repair. System failure: The watch system may be faulty, resulting in abnormal charging. You can try putting the watch into recover mode, select advancsd Advanced mode, and then select wipe, batteryTo remove battery traces.
3, charging cable or charger failure: part of the charging head and the watch USB stand poor contact, using the watch attached charging cable, charging cable damage and failure will also lead to failure to charge. Battery failure: The battery is damaged so that it cannot be charged, and it will be returned for repair. Watch software failure: The software failure can not charge, you can restart the watch, or restore the watch factory Settings, reinstall the latest software version.
4, battery damage; System failure; Charger cause poor contact. Socket loose; The battery is damaged by overdischarge. The charging cable is damaged and connected incorrectly; Caused by hardware problems. Contact oxidation; The watch battery runs out; Watch water should be sent to the mobile phone watch professional maintenance and after-sales department.
About the wireless watch can not charge what problems and wireless watch can not charge what problems this is the end of the introduction, do not know you find the information you need? If you want to know more about this, remember to follow this site. < / p >